ronaldinho_07
Aluminum
- Joined
- May 23, 2016
- Location
- VietNam
I have a machine with fanuc O control.
First time,it has alarm 950: fuse break 24e f14.
I have replaced that fuse then it breaks immediately ,i recheck the power supply unit and find out this
Soldering melted and contact each other.
I fixed it as the above picture.
Machine run well a few days
Today it suddenly power off,i mean it power off right away,no alarm at all.
I cut off CB and power on again.
Fuse breaks again at that location 24e:f14
But i cant not power on the machine
When i am trying to power on,i heard sound of magnatic contactor "click"
And then nothing.
This is magnetic contactor
Note: i press power on button the first time,i can heard magnetic contactor "click",but when i press the second time,there nothing happen
What could be the problem of this issues.
Thank you
Gửi từ LG-H901 của tôi bằng cách sử dụng Tapatalk
First time,it has alarm 950: fuse break 24e f14.
I have replaced that fuse then it breaks immediately ,i recheck the power supply unit and find out this
Soldering melted and contact each other.
I fixed it as the above picture.
Machine run well a few days
Today it suddenly power off,i mean it power off right away,no alarm at all.
I cut off CB and power on again.
Fuse breaks again at that location 24e:f14
But i cant not power on the machine
When i am trying to power on,i heard sound of magnatic contactor "click"
And then nothing.
This is magnetic contactor
Note: i press power on button the first time,i can heard magnetic contactor "click",but when i press the second time,there nothing happen
What could be the problem of this issues.
Thank you
Gửi từ LG-H901 của tôi bằng cách sử dụng Tapatalk