rons
Diamond
- Joined
- Mar 5, 2009
- Location
- California, USA
The two stage pump has this printing on the crankshaft casting.
The orientation of the characters is parallel to the crankshaft.
H100 213
On the wheel side there is:
H31-753
A nameplate that is stamped near the bottom on a surface that is perpendicular to the crank.
MOD. 5000
SER. 4005X10240
Would like to know about this and find out the Hp/rpm.
The orientation of the characters is parallel to the crankshaft.
H100 213
On the wheel side there is:
H31-753
A nameplate that is stamped near the bottom on a surface that is perpendicular to the crank.
MOD. 5000
SER. 4005X10240
Would like to know about this and find out the Hp/rpm.
Last edited: