markp
Hot Rolled
- Joined
- Oct 7, 2006
- Location
- Petaluma CA 94952
Im moving a Hexagon Optiv 2 Reference 2Z443 CMM tomorrow. I don't have the manual for transportation but the OP manual I do have indicates that there are "transportation clamps" that fix the axis. Im trying to get the info from Hexagon but dont know if I will be able to unless I get a service contract for the machine. The machine was working when I viewed today but Id rather make a more thorough inspection myself before getting any calibration/service done. I need to move about 40 miles over freeway on my flatbed truck. I was going to remove the granite upper section with the control box from the stand and set unto a 6" pad of closed cell foam on a pallet, after strapping the XY platen with ratchet straps. Id really like to know what the clamps look like and where they are positioned and any other tips. THX!