What's new
What's new

RFQ for Mill and Lathe work on medium size 316 S/S parts

JSByerly

Plastic
Joined
Sep 20, 2022
Looking for a quote for 2 each of 2 different, yet similar, products. If interested, I will send the dwg's.
This would be a trial of a new design. Once tested, we would be ordering 20 to 50 of these at time, with an additional 4 different variations.
The parts will be shipped to either Midland TX, or Tomball TX. Will decide where, when the time comes.
 
LOL. For the sample pcs, the largest OD ranges from Ø 5.62 to Ø 6.77 and less than 6 inches long. Approximately 10 to 16 lbs (finished product). One variation in the future will be around 9 inches in diameter and approx. 8 inches long (around 50 lbs finished). Let me know if you have any more questions.
 
I git you not wanting to put it out there for the whole world, but it would be helpfull to know if this is a milled part, turned part, or both?

This would at least narrow down some of your inquiries.


-----------------

Think Snow Eh!
Ox
 








 
Back
Top