Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
2outof3's latest activity
-
22outof3 replied to the thread Manual Lathe Recommendations.Haas Tl-1 Education version. https://www.haascnc.com/machines/lathes/toolroom-lathe/models/tl-1-edu.html
-
22outof3 replied to the thread Swapping out 4th axis on Brother.Not compatible. Look for a Nikken or Yukiwa table of that vintage. Andy
-
2Yeah? You would walk away from a multi-year blanket order that will keep two machines busy at $250/hr for the entire duration of the...
-
22outof3 reacted to DethloffMfg's post in the thread I have a 2023 DNM5700. Is the coolant/chip management really supposed to be this terrible? with
Like.
Per what I've been told when asking about conveyors, you have the wrong conveyor for that type of chip. -
22outof3 replied to the thread Swapping out 4th axis on Brother.The motor on the table has to match the drive.
-
22outof3 replied to the thread New Machine Day.I plan on being there. It will be my last one if all goes according to plan.
-
2Last we talked (Tool Show) I thought that you had one foot out the door? See you at the show? You'll show me the Z daylight yourself...
-
22outof3 replied to the thread New Machine Day.Yesterday I made my poor salesman drive from Houston to Baton Rouge to check on a customer. We were in the car for over 9 hours for a...
-
2Andy's dieing act will be dropping in on a Yamazen customer to see how they're doing...
-
22outof3 replied to the thread New Machine Day.Ox, you don't have to wait until September. We will gladly show you one in Ohio. :) Andy
-
2OK then, someone needs to top this thread in the first week of Zeptember, so that I remember to consciously look at that in Chi-Town the...
-
2Over the last few years, our load of big plate work has grown quite a bit. Large aluminum (Mic-6, and the like) plates, 2.5ft x 1.5ft...
-
22outof3 reacted to dwilliamdavis's post in the thread have any of you ever heard of "Niles Simmons" before? with Like.
Late response from me on this issue but let me add some more clarification. Full disclosure, I'm the President/COO of NSH USA...
-
22outof3 replied to the thread What your Brother Warmup ?.Well done! You might want to dd a couple figure eights in the movements.
-
2I created a box in my cad program (Fusion 360). The box is 2" under sized from the X-Y travels 19x 15y so the box is 17x13". The box has...