What's new

70olds's latest activity

  • 7
    70olds replied to the thread Okuma Z0 offsets for main and sub.
    I always zero my turret face to the body of my chuck(s). No tools, jaws, collets involved. There is no G55 for the sub spindle. I also...
  • 7
    70olds replied to the thread Leblond Makino.
    I will check on this, but my machine has the 20 tool carousel anyway. I have scheduled some time to meet with the guy who actually ran...
  • 7
    70olds replied to the thread Leblond Makino.
    Do I just keep scrolling until the lights show up? When I have had this issue there were no lights back there but I haven't tried...
  • 7
    70olds replied to the thread Leblond Makino.
    This does have the ability to go negative then it will turn itself around once it comes off the switch. The 3" was just a random number...
  • 7
    70olds replied to the thread Leblond Makino.
    Machine is a 74. It is definitely a geared head. I can manually cycle the pots through the tool change location on the ATC umbrella...
  • 7
    70olds replied to the thread Leblond Makino.
    That would be awesome thank you.
  • 7
    70olds replied to the thread Leblond Makino.
    Little progress. I was able to get the machine to run through MOST of my M57 Pot setting program. I cleared the CMOS and got through the...
  • 7
    70olds replied to the thread Leblond Makino.
    On this machine it forgets every time the machine is power cycled. I was told by the previous owner I have to run it every time...
  • 7
    70olds replied to the thread Leblond Makino.
    I’ll give that a shot. My machine already had the program in it with the M57 tool assignments so I assumed it was formatted correctly...
  • 7
    70olds replied to the thread Leblond Makino.
    I got the machine in the garage and powered up. After spending an hour trying to figure out why it wouldn't be "ready" I realized I was...
    • controlpicture.jpg
  • 7
    70olds replied to the thread OP1 vs OP10.
    I like when people tell me my left rear tail light is out on my truck.
  • 7
    Stay away from Hardinge, the company as a whole is going downhill fast. The last couple machines we've bought from them have been turds...
  • 7
    70olds replied to the thread Leblond Makino.
    Would that control have helical interpolation for threadmilling?
  • 7
    70olds posted the thread Leblond Makino in CNC Machining.
    I am looking at a Leblond Makino for my garage. It's a mid-80s machine that is in running condition. I can get it real cheap and have a...
  • 7
    Like Vegans, you don't have to. They'll tell you.
Back
Top