jdbouchard60 I did a quick check with a tape measure before heading out the door for work this morning. Mine is not exactly like yours ( not sure of the model) but the thread is right-handed and looks to be 2 1/4" 12tpi.
Andy
The spindle on the one I have is also threaded on the outside and takes the VN collets on the inside.
Are there any real advantages to this horizontal swivel type compared to the more normal type? Maybe total height when used at an angle.
Did you get any of the other parts for it?
Andy
Old thread but I don't even think stuarth44 would need to do any reading. The photo of the arbor out of the spindle should answer the question.
Photos might be in order if the original help won't do for your drill press.
Andy
Hi
I'm working on a mill that uses these as a kind of clutch dog on the handles. The old pins were damaged from abuse (holding the handle up against moving components during power feed). I thought this would be a quick and cheap fix just order up some new pins. There are four 15mm pins and four...
Yes I should have done that yesterday when I was working on the saw. I wanted to order the belt to have it ready for next time I'm close to the saw.
Thanks
BT
The other things I'm looking for are a photo of the switch trip off rod and what type of replacement switch I should order. The saw now...
Hi
I recently bought this saw and need a little help with a few things that I couldn't find in the manual. The saw was running when I bought it but I could see it needed s few things. First up was the normal broken spring. I got a new one from Clausing and put that in yesterday. Fast service...
Hi
I just now saw this and also your pm. Sorry about that life sometimes gets in the way of stuff.
Anyway,not the best photo but it looks like you have the model with the push / pull knurled knob. Can't remember but one way engages the gear box and the other is direct drive to the motor /belt ...
Here you go. Sopko is the place to look for this type of thing.
Adapters for Rockwell, Rockwell-Delta, Rockwell-Milwaukee Grinders, Harig, and Model 25 Grinder Manufactured by Gallmeyer & Livingston Co., Grand Rapids, MI.
Andy
Great find, Your's is the 14" metal / wood version. I would think different years had different model numbers. The gear box and several other less significant parts were changed over the years.
Newman109 is correct about the guard. With out it the running blade is exposed.
Take a photo of the...
Ray
Most of the time I just find some scrap material and punch out small slugs to use. Carr has the tipped set screws. Another thing I use and have on hand most of the time is small brass and plastic ball to use.
McMaster-Carr
Andy
One other thing that I just thought of. The middle lock kind of has a sweet spot in the middle to work right. Not to tight and not to loss to clear for movement.
Andy
BB
I can try and check tomorrow but I remember having a similar problem with my FP3NC when I got it. As I remember it was a combination of the middle lock and a timing issue with the chain itself. Keep in mind that this is a different machine and I have no experience with your machine. Looking...
This thread has reminded me of a very nice system with similar metal edges used with plywood. In the past when I have seen one of those boxes I always wondered if it was a system that you buy the edge and the tools needed and cut your own sides to fit? Or if it was a company that made the boxes...
I had this one bookmarked from some time ago. Hollingers or something like that is the one I had bookmarked in my brain.
Google should bring up more.
Metal Edge Packaging Solutions
Andy
This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. To learn more, please refer to the cookie policy. In case of sale of your personal information, you may opt out by sending us an email via our Contact Us page. To find out more about the categories of personal information collected and the purposes for which such information will be used, please refer to our privacy policy. You accept the use of cookies or other identifiers by closing or dismissing this notice, by scrolling this page, by clicking a link or button or by continuing to browse otherwise.