Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
crossthread82's latest activity
-
Ccrossthread82 replied to the thread Modular Endmill Extension (screw on head) Brand Compatibility.As @gregormarwick mentioned above the list I linked is for screw in type indexable insert milling heads. Afaik most manufactures use a...
-
Ccrossthread82 reacted to gregormarwick's post in the thread Modular Endmill Extension (screw on head) Brand Compatibility with
Like.
Are you talking about screw in indexable heads or exchangeable solid carbide heads? Because multimaster and flexfit are one and the... -
Ccrossthread82 replied to the thread Machine both ends of a bar at the same time.The real question here is how many do you have to do and how fast? That'll dictate which route/how much money and time you should devote...
-
Ccrossthread82 replied to the thread Modular Endmill Extension (screw on head) Brand Compatibility.Not sure about exchangeable headed endmills but Maritool has a list showing screw in indexable tool cross compatibility...
-
CHi again daniep: With sinker EDM one of the primary determinants of the part accuracy is the electrode accuracy, and one of the things...
-
CWhat does your drawing say about the pitch diameter? That’s what really counts. Also, what does the drawing say about tolerances on the...
-
Ccrossthread82 replied to the thread Threading Operation Doubt.I think your print is wrong. My book says 1-11.5 npsf major diameter is 32.72mm which would be why your no-go is going in when you cut...
-
Ccrossthread82 replied to the thread 4 X Diameter in 304?.You can get away with no coolant if you slow the sfm down and lube it with some oil before you start the hole. I'd spot with 140deg...
-
CCan probably line them up in between the slats or some videos I saw put another scrap steel plate under it and don't drill all the way...
-
CControlled uses wood slates, others use flat bottom drills. It common for chipped inserts. Running a lot slower than production...
-
Ccrossthread82 replied to the thread power tapping 1-8 in Stainless.I want to know how the insert drills they show don't explode when they hit one of the slats on the backside of the plate when it drills...
-
Ccrossthread82 replied to the thread power tapping 1-8 in Stainless.I agree, however your machine needs some stones to run a 1-8 form tap let alone in stainless. My guess is 1-8 form in 304 would take...
-
Ccrossthread82 reacted to TeachMePlease's post in the thread Deep Hole Drilling in SS303 on a VMC with Like.
Mitsubishi or Mikron would be my recommendation.
-
CKnock your coolant concentration up to at least 15%
-
Ccrossthread82 replied to the thread power tapping 1-8 in Stainless.I'm assuming your burning the tap drill holes in? If so that's going to murder that tap. If drilling the tap drill size holes in then a...