What's new
What's new
By:
Advanced search…

Recent content by Cycles

  1. C

    MAHO lost on Autobahn

    Of course you could always use "the big guns" to be on the safe side. In Europe it is most common to haul things with trailers and that has proven to be a safe a reliable way, cases like these are still the absolute outliers, sometimes things go south while you did everything right and you are...
  2. C

    MAHO lost on Autobahn

    I read the full german thread back when it was released in that forum and the driver clearly stated that he stayed well within all the permissible loads, this was also checked by police on site. As well as having the load in the right spot on the trailer for correct tongue load and proper...
  3. C

    Versions of Deckel FP2 with 500mm X travel?

    Hello everyone, So I might want to update my current Deckel FP1 to an FP2 if there is a good catch in my area. One thing I noticed in the past with offerings for Deckel FP2's that there seems to be a rare version with 500mm travel in X instead of the usual 400mm. Does anyone know more about...
  4. C

    Questions regarding Deckel S0 d-bit grinder

    Thank you very much! The knurled ring was so tight/stuck on the bushing, that it didn't even occur to me that these components should be freely adjustable. Now that I knew this and with a little more force and leverage, I was able to loosen the ring nut and make everything movable again.
  5. C

    Questions regarding Deckel S0 d-bit grinder

    Hello everyone, I need a little help regarding a Deckel S0 dbit grinder that I recently bought... 1) The scale of the collet holder does not match up with the indentations on the index plate, they are shifted ~2-3° to one another. The second picture shows the collet holder in the locked...
  6. C

    Any experience with MR-X6A Endmill grinder?

    So I was wondering if anyone has experience with one of those endmill grinders Link: They are made in China and sold by lots of different resellers. They can for example be found as: -MR-X6A -Knuth FSM14S -Bernardo EMG 30 Pro -.... Those machines can grind the faces of endmills including...
  7. C

    Deckel rotary table -is this genuine?

    From my experience of buying used tooling I would say things on tools were mostly altered because something was damaged, broken or got missing and not to make it somehow better. So my first reaction is always to be suspicious...
  8. C

    Deckel rotary table -is this genuine?

    I was looking for a Deckel rotary table for probably a year now. Either the price was extra spicey because of the Deckel nametag or the provider was too far away, shipping for these rotary table is usually too expensive. So yesterday a rotary table in "very good, working condition" popped up...
  9. C

    Help identifying the version of my FP1 vertical head

    Thanks to everyone for replying so far. The vertical head has a MT4 taper, just like the horizontal spindle. Here are more pictures: @DJ2: I'm not able to answer that question, I bought the mill with that particular head.
  10. C

    Help identifying the version of my FP1 vertical head

    I would like to spend some time on my Deckel FP1's vertical milling head. More specifically I would like to pull the vertical head apart, clean all parts and regrease/reoil all components according to the manual. Can anyone identify, which version of the vertical head I have? It is definitely...
  11. C

    Deckel FP1 oil channels/felt wicks help needed

    So I am one of the "greased up Deckels" victims... When I had the support apart I also cleaned out all the clogged oil channels and now I want put things back together, including replacing the old felt wicks. For the most part this is self explainatory, but for one oil channel I need input...
  12. C

    Help identifying these faceplates... for Deckel FP1 dividing head?

    I was looking for a faceplate for my dividing head with MK4 mount for quite some time now. Lately I went to a flea market and found these two faceplates with 250mm and 300mm diameter. The previous owner didn't know where these belonged to but I was pretty confident that these are from a newer...
  13. C

    Disassembly of a Deckel dividing head vice?

    Hello everyone, I got hold of a Deckel dividing head and included was the centering vice. The vice is quite dirty and the leadscrew is full of maybe decades old grease so it should probably be cleaned and regreased. So I tried to pull the vice apart... and failed. I have no idea how this...
  14. C

    Deckel Fp1 . X-axis 1.5mm play

    If I recall correctly, the Deckel FP1 mills have an oddball thread size for their axis spindles and nuts, which made it complicated to reproduce in the homeshop since there are no taps in this size readily available. It was TR24x4 I believe, maybe someone else can confirm?
  15. C

    Drill Chuck with MK4 M16 mount for a mill?

    Hey everyone, I sometimes run into the situation where I have to countersink and drill a lot of holes on my mill. Since I don't have a DRO, I can't countersink all holes first an then come back and drill them out. To get backlash out of the equation, I have to countersink and subsequently drill...
See more

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2024 Copyright Practicalmachinist.com. All Rights reserved.

Back
Top