Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
Cyclotronguy's latest activity
-
CCyclotronguy replied to the thread Vise.Not trying to rain on anyone's parade, but the last import I purchased new, from a very reputable seller had to come apart and get the...
-
CCyclotronguy replied to the thread Thompson Grinder and Antique Hydraulic Seals.In a pinch, "buna quad rings" perhaps.
-
CCyclotronguy replied to the thread Tilting Mill Vise.Ditto, I have a Yuasa that repeats, it's angularity is moderated by an adjustable truss rod in addition to the usual joints you snug...
-
CCyclotronguy replied to the thread Mill Guarding.How bout like this, my knee mill at home, more to keep the mess and chips at bay and out of the house. Pretty sure this passes muster.
-
-
CCyclotronguy replied to the thread Sharpening drills from ¾" to 1".There is an adjustble cam on the nose that will give various lifts, rt hand or left hand, depending upon how it is adjusted. A ring...
-
CCyclotronguy replied to the thread Sharpening drills from ¾" to 1".Harig Step-Tool fixture, as indicated I have one complete, so we can clone any missing parts (within reason) Here is a liink to one for...
-
CCyclotronguy replied to the thread Wtb Volstro shaper slotter or similar.Duke, If this is a one off on a knee mill,then their is already a hand stroke mechanism in place on the quill anything you add is...
-
CCyclotronguy replied to the thread Sharpening drills from ¾" to 1".Rimcanyon Our friend Tom Lipton had a Harig cam fixture that takes 5C tooling missing parts. I have a complete one that we could clone...
-
CCyclotronguy replied to the thread Wtb Volstro shaper slotter or similar.The Volstro slotter was only for the lightest imaginable work in the most compliant material. You'e better off getting someone to burn...
-
CCyclotronguy replied to the thread Problems with TIG on Mild Steel.I was gong to say that was either high carbon or leaded steel.
-
CCyclotronguy replied to the thread Hammond Vertical Belt Sander.Pro bally the most used machine in my shop!
-
CCyclotronguy replied to the thread Advice on Cutters for Horizontal Mill.John In an ideal world you would want the cutter to overhang the edges of the part. Your ability to step over will depend upon how...
-
CCyclotronguy replied to the thread WTB: Barrett Brake Doktor.Mount the car backing plates on a lathe, assemble the shoes and tie everything down solid. now turn the linings with a ceremet insert
-
CCyclotronguy replied to the thread Monarch relieving attachment.Yup, used to make custom cutters, even went so far as to kluge one up once on a HES tracer lathe. Spindle had to be barely turning but...
-
CCyclotronguy replied to the thread Man with Moore.When I was a tiny kid, (early 60) machinists dressed, even my grandfather who worked at Yuba Manufacturing in the San Francisco Bay...
![IMG_20230429_121113100[1].jpg](/forum/data/attachments/377/377013-3c80ab02533e08beb684a583808eeb71.jpg)