Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
D Nelson's latest activity
-
D Nelson replied to the thread Aluminum sticking to table saw balde?.Try a coarser carbide blade Don -
D Nelson replied to the thread New UMC 1000 questions.Haas can shut off the protection zone no problem the can’t probe with b axis not home is to keep you from hitting the table with the...
-
D Nelson replied to the thread Wire EDM general performance in real terms....Yes the water condition is important it won’t cut if it’s conductive it must go thru the resin to get cleaned. A submerged machine will...
-
D Nelson replied to the thread Wire EDM general performance in real terms....,1 to ,2 inches per minute not hour probably 10 dollars per hour for the wire and electric you have to add your shop cost to that number...
-
D Nelson replied to the thread Have you ever met a machinist that was better than you?.Nope made them myself a few more pics
-
-
D Nelson replied to the thread Press Brakes.Rule of thumb is it takes 10 tons to bend 1 foot of 10 gage material Don
-
D Nelson replied to the thread Have you ever met a machinist that was better than you?.
-
-
D Nelson replied to the thread Have you ever met a machinist that was better than you?.Let’s see some pics of this amazing work Don
-
D Nelson replied to the thread Robot Accuracy.Drop the dowels into a vibratory bowl let that bring them up to a known position for the robot to grab them from Don
-
I'd probably use a 3/8 reduced neck end mill like this one. https://www.helicaltool.com/products/tool-details-81387
-
D Nelson replied to the thread Moon landing or or not?.Yes the rocket went up. I think they were in low earth orbit only doing satellite work and yes they did come back. And yes they did die...
-
D Nelson replied to the thread Material options for precision, hardened parts with no grinder access.If a-2 is too expensive for you you need a different hobby Don
-
D Nelson replied to the thread OT: My shop/business was destroyed by Arson; insurance questions.The big print giveth and the fine print take it away Don
-
D Nelson replied to the thread Impossible to machine feature?.If there is lots of them maybe they could cold headed Don
-
D Nelson replied to the thread Manual saw for cutting up blanks recommendations..For cutting aluminum extrusion you can’t beat a regular wood chop saw with a carbide wood blade Don
