I had a Rockwell 10" (as noted above about 15 years ago!) and the Reeves drive in that was fine with new bearings. I simply replaced all the off-the-shelf sealed ball bearings in the from the motor pulley to the spindle pulley.
I also had a Rockwell 20" metal/wood cutting bandsaw (the model...
I think john.k is closest to the problem here.
From reading the thread charts and the dial chart... that is clearly a 4TPI imperial lead screw. The thread dial chart shows "16 1-8 " which means that any position is allowed on the thread dial. This is the same for TPIs that are whole multiples...
Oh that's easy. Simply eyeball it and do some test cuts (same as in the docs I linked to) on a test piece of the same diameter and material as the work piece. Adjust from there for the desired results. Wheter you use an Aloris (or other style) of qctp or 4-way just keep track of the setup and...
That is a cut-knurl type tool. Simple straight or spiral. Will not do diamond knurling. I have a similar German made cut knurler for diamond knurling. They are awesome. Fast, consistent, clean knurling with very low tool pressure. I did a quick google and while I couldn't find your exact model I...
Is your shaft straight, true, and concentric to begin with? Looks like that one has traveled over a shop floor once or twice and been traveled over itself by some heavy blunt objects. You can not check the runout of a shaft in bearings unless you know the shaft to be near perfect before mounting...
My first impression is that it is a nice wooden box. Usually one puts stuff in boxes. Fortunately that one has the FSN# which if you google it you will find it is a balancing kit for the main rotor of some sort of helicopter. Any more details I will leave up to you to discover.
Here is an engine that uses castings. The drawings are quite detailed as are the tables of operations (what cut to make and how.) The whole book is available online and has some other worthwhile projects.
The whole book is available here...
This topic has come up from time to time here on PM. In one of those past disscussions someone mentioned "Mechanical and Metal Trades Handbook" by Europa-Lehrmittel. My copy is the 4th edition 'English' version.
https://www.europa-lehrmittel.de/Mechanical-and-Metal-Trades-Handbook/1910X-4 I...
The only advantage stronger magnets will give you is the distance between the magnet and the sensor can be greater. The disadvantage to using a stronger magnet (especially as strong as some neodymium are) is that, in a machine shop environment, they will attract and collect anything made of iron...
I use machinist jacks with differential threads so I effectively have 16 TPI, 14 TPI, and 112 TPI adjustment from each jack. I recently needed to level my small surface plate in order to check my levels... sounds weird but you all know what I mean :D I have the usual Starrett and other brands...
OK so the slot is 1/16 of an inch wide by 1/8 of a foot deep (or 1.5 inches). Yeah that is going to be a tough one. More seriously I am sure you mean 1/8 of an inch deep. Then there is the depth of the slot your slot is already in. What are the tolerances on this slot? What is the material and...
Without being able to see the internal structure of that vessel wall I would say it is either a reaction vessel or holding vessel from a petrochemical plant. Very unlikely it ever held a product for human consumption as there are so many potential nooks and crannies in all those welds. Whatever...
I have used wood, modeling clay (plasticine), wax. Modeling clay is possibly the easiest but lacks rigidity. One can chill it to "stiffen" things up for a bit. Only CAD program I have ever used that has the ability to model things similar to the way one would "machine" them is VariCAD...
This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. To learn more, please refer to the cookie policy. In case of sale of your personal information, you may opt out by sending us an email via our Contact Us page. To find out more about the categories of personal information collected and the purposes for which such information will be used, please refer to our privacy policy. You accept the use of cookies or other identifiers by closing or dismissing this notice, by scrolling this page, by clicking a link or button or by continuing to browse otherwise.