Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
DavidScott's latest activity
-
DavidScott replied to the thread Hurco Vm1 spindle bearing replacement. Does it need to be sent in or can I replace them myself?.If the alignment is out don't shim the spindle, do the adjustments at the way blocks, and use a torque wrench when you tighten the bolts... -
Here's a sketch on how to do it. Roller needs to be tangential to left hand surface. You can clamp a parallel to the surface as an aid.
-
DavidScott reacted to Vancbiker's post in the thread Honest Question: Do modern CNC machines still need battery storage for settings? with
Like.
When you look at the design lifespan for a Fanuc CNC compared to a generic “computer” by which I presumed you meant PC, you might... -
DavidScott replied to the thread Easily grind on a CNC using electroplated wheels.Do they run the tools at full speed or slow the SFM down when used dry?
-
DavidScott replied to the thread How to best code Brother synchronized tapping?.No problem tapping holes, only being very cautious retapping so I wanted to make sure the second try would follow the same threads as...
-
DavidScott reacted to tc227's post in the thread How to best code Brother synchronized tapping? with Like.
Back in the first week of April Brother Frank gave a chart on the M-241 through M-250. The default was set at 6000 rpm for tapping I...
-
DavidScott replied to the thread Easily grind on a CNC using electroplated wheels.My experience facing hard stuff such as granite and porcelainized ceramics was that single-surface diamond tools quit working very...
-
DavidScott replied to the thread Easily grind on a CNC using electroplated wheels.I understand that how much grinding you do will affect how much filtration capacity you need. If you only do a little then you don't...
-
DavidScott replied to the thread Easily grind on a CNC using electroplated wheels.Yeah, I am aware of what AB Tools does, and that they send their rotaries in for rebuild every 3 to 4 years, and replace screws at...
-
DavidScott replied to the thread Easily grind on a CNC using electroplated wheels.What method of plating do you use? I used to get a bunch of blanks I made plated with diamond in a high vacuum chamber. As for...
-
DavidScott replied to the thread The Ultimate Coolant Ring.Or your 4th axis.
-
DavidScott replied to the thread The Ultimate Coolant Ring.I have a 1hp Grundfos that pumps 35gpm @ 160 psi with a max of 170. It set the bar for me as to what is possible for a coolant pump. I...
-
DavidScott reacted to G-ManBart's post in the thread OT Big brother is definitely watching with Like.
It's Google, not necessarily "Big Brother"....but yes, your phones are always listening. That's how things like Siri and any other...
-
Yup. My go-to with a machine that can't move fast enough to get out of its own way is corncob roughing endmills. Full depth, full slot -...
-
DavidScott replied to the thread How to best code Brother synchronized tapping?.Thanks, first time trying and missed that.