Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
DMF_TomB's latest activity
-
DDMF_TomB replied to the thread machining 304 stainless steel.most cutting tools like inserts list recommended feeds and speeds . obvious tool holder (length stick out) , part, machine vibration...
-
DDMF_TomB replied to the thread Maybe getting out of machining....I got laid off in 2012 (company bankruptcy) and had to look for another job. often it gives time to think about what job you want to do...
-
DDMF_TomB replied to the thread Maybe getting out of machining....I know a machinist didn't feel appreciated and found another job at a different company at $3./hour more pay as a machinist so even with...
-
DDMF_TomB replied to the thread Are these cheap 0.02mm/m Chinese level vials really accurate?.Web Conveyance roll level I made can hold on bottom, top or side of a cylindrical roller. 0.004"/10" increment level vial, held plastic...
-
-
DDMF_TomB replied to the thread Are these cheap 0.02mm/m Chinese level vials really accurate?.one level i had a problem with as shown it was rtv glued to grooved metal piece and glue failed one end thus the rubber band, obviously...
-
-
DDMF_TomB replied to the thread Are these cheap 0.02mm/m Chinese level vials really accurate?.easy to test if 0.02mm/m and level is 200mm long, 5 increment is 0.1mm/m or 0.02mm/200mm 5 increment is 0.0008" per 8" roughly .0025"...
-
-
DDMF_TomB replied to the thread Why do you use cast iron vs cheap mild steel?.. some steel parts cause tougher stronger are made thinner. cast iron cause it is not as strong or tough parts are often made much much...
-
DDMF_TomB replied to the thread Why do you use cast iron vs cheap mild steel?.I use Cast Iron grade A or grade 35 usually thinner than 1.5" (tensile strength is 35000 psi) Cast Iron grade B or grade 40 usually...
