Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
GiroDyno's latest activity
-
GGiroDyno replied to the thread Mikron touch probe not agreeing with manual bore pickup.Are you manually removing the probe and then putting the probe back in the same orientation to the spindle and not 180* out? If its...
-
GGiroDyno replied to the thread Robot Accuracy.Do you mean on something like a welding robot would you want the tip of the welder to be on the centerline of the last axis, so shift...
-
-
GGiroDyno replied to the thread Swapping out 4th axis on Brother.I saw a couple rotary tables on eBay that looked to be in reasonable condition but counting the number of dings in the paint isn't...
-
GThe motor on the table has to match the drive.
-
GGiroDyno replied to the thread Spindle liners - 3D printed???.A crappy 3D first printer will sour you on all printers, especially if you're going out on a limb to get one. If you have time to...
-
GI bought a couple of the new textured PEI plates. No glue stick needed. Work great for first layer adhesion I like the textured plate...
-
GGiroDyno replied to the thread Spindle liners - 3D printed???.I believe their less expensive printers now come with at least the option for an enclosure if it's not actually standard. Do get an...
-
GGiroDyno replied to the thread Spindle liners - 3D printed???.I like that stock setter. I had one made from aluminum angle with a sliding component and a set screw so it would get adjusted to each...
-
-
GMachine is a S2DnO, it came equipped with one of those dual rotary tables with two parallel 3" chucks, I believe it is a Nikken but...
-
GGiroDyno replied to the thread Spindle liners - 3D printed???.PETG is resistant to coolant, and holds up well enough to chips and clumsy operators. Unlike Nylon or reinforced materials its really...
-
GGiroDyno replied to the thread Mastercam Automation.Is there a way to have a parameterized stock model and permanently assign WCS to the stock in MCAM? You could have an array of...
-
GGiroDyno reacted to BROTHERFRANK's post in the thread OK to run a tap twice? Brother Speedio S700 with
Like.
First thing to try is optimize your tapping for the slower speed with a M241 before the tap cycle. This should get rid of the 'snick'... -
GWell, the Sandvik 880 worked fantastic. I am using a 1.000in ISCAR Chamdrill to pilot, then coming in with the 2.250in Sandvik. The...
-
GIt will depend on your saw type, of course, but I've seen where a customer made a sheet metal table that looked like a spiral - or a pig...
-
GGiroDyno reacted to DavidScott's post in the thread Small stainless parts, small endmills -- HSM/trochoidal still the way to go, or maybe a segmented rougher? with Like.
You need to move the screw an inch or two every so often to get the lubrication distributed. The tiny moves displace the lubrication...
