Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
Recent content by Gloryrates500
-
Very late best condition upgraded FP4NC ever?
Here in the foreground the system can be seen in a holder.- Gloryrates500
- Post #13
- Forum: Deckel, Maho, Aciera, Abene Mills
-
Very late best condition upgraded FP4NC ever?
A very good and non-destructive device is the Krautkraemer Microdur M1. It measures the hardness according to the UCI method, is portable and can be used anywhere without any problems. The probe is calibrated on a reference sample of the material to be tested. You then place the probe on the...- Gloryrates500
- Post #12
- Forum: Deckel, Maho, Aciera, Abene Mills
-
An example of improper behavior on the D11 machine
It also seems to be possible to crash the D11 with questionable program lines.... Sometimes I work on parts that have already gone through many stages of production. So that I don't cause any damage to these parts, which are now my responsibility, I install some break point lines in the program...- Gloryrates500
- Post #8
- Forum: Deckel, Maho, Aciera, Abene Mills
-
Brand new Bosch drives for old Deckel NC /A machines
This is the power supply card- Gloryrates500
- Post #10
- Forum: Deckel, Maho, Aciera, Abene Mills
-
Brand new Bosch drives for old Deckel NC /A machines
As with Bosch, the card is equipped with an optimization card, which the producer tuned to me perfectly according to the servo motors for X/Y and Z and taking the age of the motors into account. Mr. Methfessel is also very friendly, helpful and approachable over the phone.- Gloryrates500
- Post #9
- Forum: Deckel, Maho, Aciera, Abene Mills
-
Brand new Bosch drives for old Deckel NC /A machines
The black cover is a gigantic heat sink that is screwed to another massive aluminum block below the black surface. The power transistors are therefore extremely well cooled. It is the block in the background- Gloryrates500
- Post #8
- Forum: Deckel, Maho, Aciera, Abene Mills
-
Brand new Bosch drives for old Deckel NC /A machines
I have attached the pictures of the cards from "msrtec" which Martin described above. I installed my cards in a MIKRON WF3 DCM with Heidenhain TNC150. They are of extremely high quality....but the prices for a set were also very high. I needed them because the original BOSCH cards were causing...- Gloryrates500
- Post #7
- Forum: Deckel, Maho, Aciera, Abene Mills
-
Brand new Bosch drives for old Deckel NC /A machines
The same like mine on ebay...- Gloryrates500
- Post #5
- Forum: Deckel, Maho, Aciera, Abene Mills
-
FP3 Active with trouble
If the module of the gear is known, perhaps you can purchase blanks here and machine the hub yourself https://www.maedler.de/product/1643/stirnzahnraeder-zahnstangen-innenzahnkraenze-sperrraeder- Gloryrates500
- Post #8
- Forum: Deckel, Maho, Aciera, Abene Mills
-
Brand new Bosch drives for old Deckel NC /A machines
The cards that come from a TR that I found cheaply on eBay. These are not the cards I purchased from the company mentioned above. The pictures of these cards will follow in the next few days... because of Christmas- Gloryrates500
- Post #4
- Forum: Deckel, Maho, Aciera, Abene Mills
-
Deckel Dialog 11 FP50CC/T SPS error code on startup
It looks as if market conditions have changed and the times when such „high-earning service providers„ had lucrative jobs are slowly coming to an end….- Gloryrates500
- Post #36
- Forum: Deckel, Maho, Aciera, Abene Mills
-
How warm does your Deckel vertical spindle head get?
Cheers and merry Christmas- Gloryrates500
- Post #6
- Forum: Deckel, Maho, Aciera, Abene Mills
-
How warm does your Deckel vertical spindle head get?
Here is some information about.... https://www.practicalmachinist.com/forum/threads/deckel-spindle-warmup-temp.399021/- Gloryrates500
- Post #4
- Forum: Deckel, Maho, Aciera, Abene Mills