Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
goldenfab's latest activity
-
goldenfab replied to the thread Creation software.I use Rhino, great program but I found it very difficult to learn, second to Blender. I spent several hours a day for a few weeks going... -
goldenfab replied to the thread Request for Help with Custom Lathe Headstock.Given your setup 20 thou of deflection isn't surprising. The second setup looks better except for the part where its mounted to wood...
-
goldenfab replied to the thread Creation software.What he said word for word. If it's really simple you could try freecad. It works surprisingly well for being free.
-
goldenfab replied to the thread How much could I lift?.LVL manufacturers provide load tables however the problem is they are usually in lb per foot which doesn't help you because if you added...
-
goldenfab replied to the thread Belt Drive theory and basic knowledge ... for a practical example.It sure is fast but acceptable with the correct prop. Guys that run the DA-170 engine I referenced spin 30" props in excess of 6,000rpm...
-
goldenfab replied to the thread Belt Drive theory and basic knowledge ... for a practical example.What don't you understand about belt drive systems? The diameter of one pulley over the other is going to give you the reduction are. I...
-
goldenfab replied to the thread New to Fusion 360, Anyone want to walk me through an easy one?.What specific questions do you have? It sounds like based on your experience you understand the workflow of CAD->CAM->posting g code? Do...
-
goldenfab replied to the thread Normal operation for air/oil spindle?.I started to poke around but it wasn't obvious which solenoid controls it. I'm procrastinating digging through that terribly written...
-
goldenfab replied to the thread Normal operation for air/oil spindle?.I have the same issue as the OP, air oil spindle uses a lot of air when idle and never turns off when stopped. It would be nice to be...
-
goldenfab replied to the thread Where can I rent a pickup that allows more than 10000# trailer towing?.Around here Home Depot rents trucks I think they are F250s. I don't have any idea what they are ok with you towing.
-
goldenfab replied to the thread question related to Fadal VMC 15XT.1) I don't know but the parameters are really simple compared to say a Fanuc. I was going to replace my battery but after making a...
-
goldenfab reacted to Overland's post in the thread WTB: Metal Spinning Lathe or Stamping Press with
Like.
Might be of interest.... No affiliation. Bob... -
goldenfab replied to the thread OT: Plexus Plastic Cleaner Alternative.Thanks for all the suggestions. I just sent you an email.
-
Novus makes plastic cleaners in #1, #2, #3. The #1 is excellent for clear plastics and will not damage them i.e. abrasives. The #1 is...
-
goldenfab reacted to Gordon Heaton's post in the thread OT: Plexus Plastic Cleaner Alternative with Like.
I second the Meguiar's products. 3M also makes one that you can find at most auto parts stores. Both of these products work best with a...