Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
imachine909's latest activity
-
Iimachine909 replied to the thread Clamping Large Billets on Horizontal Machine.Good looking clamps! Was any math used when designing them? Are both the base and the clamp 4140?
-
Iimachine909 replied to the thread Clamping Large Billets on Horizontal Machine.Do you torque the pitbulls?
-
Iimachine909 replied to the thread Clamping Large Billets on Horizontal Machine.Yes sir it's a MAG. I agree with you. However I seen pictures of wing skins being held in clamps similar for roughing and the MAG...
-
Iimachine909 replied to the thread Clamping Large Billets on Horizontal Machine.@davehud 120" x 59" @sfriedberg We will have some support points. Do you have any examples of these spring loaded supports? I agree...
-
Iimachine909 reacted to Garwood's post in the thread Clamping Large Billets on Horizontal Machine with
Like.
I do 23" wide 1" 6061 held with pitbill clamps pushing into serrated grippers. 46" @ 3.5" sounds like no problem. Just need enough... -
Iimachine909 reacted to Orange Vise's post in the thread Clamping Large Billets on Horizontal Machine with Like.
At 3.5" thick, I think those 2-piece vises will work fine. Somewhat similar to VTL chuck jaws I've used in the past. I've machined 60"...
-
ILooking for ideas and experiences of what people use to clamp large aluminum billets on horizontal machines. The stock size I'm...
-
