My understanding is that the phase perfect units can handle a certain overload for a short period of time.
2 additional pieces of additional data:
I put a clamp on meter on my VF4SS input leg, from spindle off to 12,000rpm it pulls 96 amps the whole time it accelerates, that's the only time it...
It simply works by applying pressure to pull the platter into the body generating a clamping force.
Yes, please take and post pictures of the innards and everything :)
It's common for Haas, For normal machines and SS you need to have at least .1" clearance plane, During rapid moves it accelerates the other axes and slightly rounds corners.
I have the rectangular hole on my VF4 and a 6" hole and standoff on my VF2 because of the way the HMI hangs over the front, not enough room on top to cut a direct rectangular hole.
Yes Please, if you do this, please document well. I'm not a linux guy by any stretch of the imagination, I managed to get a CNC TIG welder going using it but if I wanted to update my linuxcnc distro, there is no way I could get it running again in any reasonable amount of time - so much changes...
Thanks for posting info and questions - even if the forum couldn't help, maybe you can help me :)
I have a HRT210 - not sure how far apart you took yours - my brake plate o-ring is leaking - do you know if I'll loose oil if I pop off just that plate? I don't really want to take this job down to...
It could be as simple as the o-rings, 50 and 51 - specifically 51 failing. My 50 o-ring is failing but I'm replacing both when I go in. Another thing it could be is coolant getting onto the muffler, then dripping down the line, evaporating down to oil and that's maybe the oil coming out of it?
I run large lines in the shop but I have a 1/4" hose going to my VF2 at the moment - never any issues. The VF4SS is another story. It had 1/4" on it when I bought it, but now the smallest is 1/2" NPT.
Where in MN are you? I have some used ER16's that I'm still using but would let go if you're...
The MistAway unit works really well, I have two of them now, they don't get a ton of use though. My understanding is that the electronic filter units will last longer and be cheaper to maintain but I don't expect to need to change filters very often.
They're also not very loud, it's more like a...
This is exactly the problem.
I have used a few. It might sound backwards but make a list of cons for each software package and choose the one that has the least that impact you.
Mastercam is too big and complex for many to use effectively. Also rather expensive.
Gibbs from what I saw was too...
Turns out it was the mufflers all along, The quick exhaust valves seemed to fix the banging now that it's getting a precharge, I tried removing one muffler before but it didn't seem to help, but it definitely did this time! 2 new mufflers and we're ready to go.
Thanks for the input, I started with the cheapest components first, might be time to buy some new valves.
I haven't tested draw bar pressure, I think it's about time to check that.
This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. To learn more, please refer to the cookie policy. In case of sale of your personal information, you may opt out by sending us an email via our Contact Us page. To find out more about the categories of personal information collected and the purposes for which such information will be used, please refer to our privacy policy. You accept the use of cookies or other identifiers by closing or dismissing this notice, by scrolling this page, by clicking a link or button or by continuing to browse otherwise.