Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
lazz's latest activity
-
lazz replied to the thread Number and letter drill bits.Watch out for the postage, The last medium flat rate sized box from Perth to Phoenix was more than $100 US -
lazz replied to the thread OT..OSHA Scaffold.When I worked with scaffolding the tag system was all about who got the blame for anything that happened with or on a scaffolding...
-
lazz reacted to L Vanice's post in the thread Hardinge HSL-59 wiring troubles, maybe contactor issues. with
Like.
I have an HSL and rebuilt it with a new 1 HP three phase brake motor and 120V input VFD. I replaced the OEM momentary contact paddle... -
lazz replied to the thread Hardinge HSL-59 wiring troubles, maybe contactor issues..Solved :) The contact points were not perfect. A few passes with fine steel wool cleared that issue. But did not fix the problem...
-
-
lazz replied to the thread Hardinge HSL-59 wiring troubles, maybe contactor issues..Thank you sir... My original title was lacking. With luck it is better now.
-
I have a HSL-59 single phase 115v. After several trouble free years I now have a staying on issue. As of recently turn the lathe on and...
-
-
lazz replied to the thread Just picked up a horizontal Mill, what kind is it?.How is it When mentioning line shafts dont forget David Richards.
-
lazz replied to the thread FS : National Machine Tool key seaters and a few broaches.The keyseaters are available.
-
lazz replied to the thread FS : National Machine Tool key seaters and a few broaches.Broaches B) Dumont 3/8" D with a tube and preserving dried oil and a couple shims. $30 C) Hassay Savage 3/8" C with a tube $25 D)...
-
-
lazz posted the thread FS : National Machine Tool key seaters and a few broaches in Tooling, Parts and Accessories For Sale or Wanted.Once this post ages I will provide a list of what is left... Look for my last post in this thread. As usual I dont care about...
-
-
Starrett has been coasting off the China stuff for like 20 years now. Their stock price has dropped from $28/share in 2008 down to about...
-
lazz replied to the thread 6” 4-Jaw Lathe Chuck and Back Plate $80.Only 3?
-
lazz replied to the thread Vise identification?.I thought those were previous user autographs.
-
lazz replied to the thread Drill bit stuck in steel.If you are a patient person the sure fire way I was shown is to use a hard punch to chip away at the drill. I usually use a concrete pin...
-
-
lazz replied to the thread Can somebody recognize this unusual mystery all-metal vintage or antique lathe needle or pointer attachment for a lathe?.If you poke the pointy end on some part of your anatomy. You will give this item a name.
