Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
MotoX's latest activity
-
MotoX reacted to Garwood's post in the thread I guess its time for me to start my own Home shop thread. with
Like.
You should be an insurance salesman. You act like the majority of machine shop owners actually have covers on their breaker panels. -
MotoX reacted to Garwood's post in the thread I guess its time for me to start my own Home shop thread. with Like.
I would run the slab you got. If it was 8" thick concrete it still doesn't mean what's underneath it was prepped right for machines on...
-
Not really. If the level is accurate it will read with the same error when reversed by 180* The fact that it reads the plate as level...
-
See, if you do that then you are going to find out that they are welding it into a plate and then you are gonna hafta kill someone
-
Well, we found a solution. It turns out that the amount of material being roughed away seems to have changed the internal stresses of...
-
Lot's of great advise here but I would like to add that it is very difficult to get perfectly round and or flat parts from plate in...
-
MotoX replied to the thread Part coming out eliptical.Right on here. I've been meaning to refit my machines with lower range of gauges, but just never had the time. The regulators can...
-
MotoX replied to the thread Part coming out eliptical.This is a good tip. Garbage in is garbage out. My entire family of parts is thin walled tubing. I use mostly three jaw chucks. Most of...
-
We deal with this every day, raw material be it bar stock/waterjet/laser cut is not going to be perfectly round. If you're concerned...
-
I hope you throat punched him