Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
nt1953's latest activity
-
Nnt1953 replied to the thread RPM slow to ramp up on a Monarch series 61.Well I lightened the belts a bit (takes care of the wear in of new belts), and I tightened the clutch by one hole. Everything is working...
-
Nnt1953 replied to the thread RPM slow to ramp up on a Monarch series 61.Do you suspect a clutch problem? I don't understand how the clutch could exhibit the problems I am seeing. That being said, I will...
-
Nnt1953 replied to the thread 61 Part Out.If the crossfeed dial is good, I need it. I would also be interested in the crossfeed screw bearing housing.
-
NWhen I first turn on my series 61 and engage the clutch, the spindle RPM is much slower than it should be. Over time, the RPM increases...
-
Nnt1953 posted the thread 6” 4-Jaw Lathe Chuck and Back Plate $80 in Tooling, Parts and Accessories For Sale or Wanted.This is a 6”, 4 jaw, light weight chuck fitted with a M46-3 back plate. I have been using it on a dividing head, but no longer need it...
-
