Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
redlee's latest activity
-
redlee replied to the thread Can this precision level be calibrated?.Yes I see that now, you have to keep it in the exact same spot, rotate 180 and adjust accordingly. Thanks -
redlee replied to the thread Can this precision level be calibrated?.Yes, What I was trying to say is if you only have one level and you dont know if its good then you need another good one to check.
-
redlee replied to the thread Can this precision level be calibrated?.Do you have another level to compare ?
-
redlee replied to the thread Can this precision level be calibrated?.You have to know if your table is level before messing with it.
-
redlee replied to the thread maching square bar to round.Harbor Freight I hope.
-
If the bar is hanging out the chuck far enough and the speed is high enough and your lathe has a big enough swing the radius should be...
-
redlee replied to the thread Welding vs Machining.Machinists need welders, Welders need Machinists. If I had to choose it would be a Machinist.
-
redlee replied to the thread flat sided files.I think if your looking for a profile as such you will have to have it made. Or stitch one yourself. I was confused with the pic. Do you...
-
redlee replied to the thread flat sided files.Your looking for a round file ?
-
redlee replied to the thread Good Bench Grinder?.I agree with others, some of the old brands were very good, Rockwell, Black and Decker ,Jet etc. I have an old B&D 3/4 HP circa 1960's...
-
redlee replied to the thread Good Bench Grinder?.I agree, take the wheels off and run it, if its good then its either the wheels, washers or the bushings.
-
redlee replied to the thread lathe brake issue or is this normal.Mine stops very fast according to how hard you press, but less than a second if you nail it.
-
redlee replied to the thread lathe brake issue or is this normal.My brake is set so that as soon as you tap it the motor cuts, Im sure its either adjustment or as you say glazing. Get someone to look...
-
redlee replied to the thread lathe brake issue or is this normal.I also have a Victor Lathe, when I got it the brake sucked, took the shoes to a reline shop and adjusted it. Could be adjustment, worn...
-
Problem 1: rabies has a lengthy incubation period Problem 2: treatment after onset of symptoms does not work, and at that point it is...
