Largest Manufacturing Technology Community on the Web
Stay Connected:
Recent content by Ries
-
Edge breaks on plate parts?
Totally agree. I have a $300 nitto version of this, and its useless on stainless. i do this sort of thing with a 60 grit klingspor flap disc on a 4 1/2” grinder, then touch up the corners with a round file. I find the belts on the little 1” belt sanders snag quickly and are ruined, while a...- Ries
- Post #24
- Forum: Fabrication: CNC Laser, Waterjet, Plasma, Welding
-
Making a handrail - angles don't add up - what am I missing geometry-wise?
the 4" sphere rule is for railings that are protecting you from at least a 30" drop. They apply to any opening in one of those. But as you have said, this is not getting inspected, so just do what you want. I have done literally hundreds of linear feet with the 4" rule, and no opening can allow... -
Making a handrail - angles don't add up - what am I missing geometry-wise?
I have built a lot of railings, and I always do a full scale drawing based on field measurement. Long runs, i draw on the floor with soapstone or sharpie, little ones like this i do on paper. Never seen a stair that matched the ideal. Rise ( height of step) can often vary, run can vary, angles... -
Lil OT: Mounting anvil to wood block.
My base is made out of 2x4's, they were free. Straps, no holes in anvil. 20 plus years, no issues. -
KARD Air/Hydraulic Press refurbishment
These guys may know. https://www.diecastmachinery.com/Kard-Trim-Presses-For-Sale.php -
What are readers seeing in commercial office occupancy rates?
while anyone is welcome to personally prefer to live in a rural area (I have been living on a 32 acre farm since 1995) The FACT is that 80% of the US population lives in urban areas. Brooklyn, alone, has 5 times the population of the whole state of Wyoming. NYC in total has more population...- Ries
- Post #11
- Forum: Manufacturing in America and Europe
-
What are readers seeing in commercial office occupancy rates?
I have been paying a bit of attention to this, in Buenos Aires, and in Seattle, and in neither case does it look like Financial Collapse is a likely result. People default on office building loans from time to time, the world doesnt end. A certain percentage of offices can be converted to...- Ries
- Post #3
- Forum: Manufacturing in America and Europe
-
Ongoing unrest in Russia
reaction time from radar acquisition to missile firing on a patriot system is about 9 seconds. Range is 50 miles, depending on type of target. If you are seriously suggesting the russians would launch a full on ICBM attack, no, the patriots probably wouldnt catch many of those, but that would...- Ries
- Post #674
- Forum: Manufacturing in America and Europe
-
Ongoing unrest in Russia
Huh? Barstow is right next to the skunk works and edwards afb, you better believe they have a patriot system nearby, and russia dosnt have much left in the way of cruise missiles anymore. They used em all up on ukrainian hospitals and coffee shops, so highly unlikely…- Ries
- Post #670
- Forum: Manufacturing in America and Europe
-
ZEH & HAHNEMANN Co. Interesting friction drive press
thats what blacksmiths would call a powered, or motorized, fly press. I know a several blacksmiths who have one of those. There is a taller, skinnier version that was, I believe, from the automotive industry, used for making smaller sheet metal stampings. I have seen one in Philly and one in...- Ries
- Post #17
- Forum: Antique Machinery and History
-
Moving a 400 ton bridge
My Nissan was a 2WD V6 king cab with an automatic. Never go offroad, no need for 4WD, and it never lived anywhere there was snow. But the rack could easily take 1200lbs of 20' steel, and I once dropped off a load at the galvanizers that they told me weighed 2100lbs. I did install overload...- Ries
- Post #16
- Forum: Material Handling and Rigging
-
Moving a 400 ton bridge
Bought em at the old JC Whitney flagship store in downtown Chicago in 89.- Ries
- Post #8
- Forum: Material Handling and Rigging
-
Moving a 400 ton bridge
I couldnt afford Mammoet, so I used my Nissan instead.- Ries
- Post #6
- Forum: Material Handling and Rigging
-
Any suggestions on cutting small and thin parts from 304
this guy posts here, he mills his blades in his shop https://goughcustom.com/- Ries
- Post #5
- Forum: CNC Machining
-
Any suggestions on cutting small and thin parts from 304
waterjet or laser the blanks, then double disc grind em.- Ries
- Post #4
- Forum: CNC Machining