What's new

Recent content by sasanifab

  1. S

    Bridgeport ezpath 2 headstock alignment

    For the life of me I cant seem to find the 4th bolt to loosen the headstock. The manual doesnt help at all. There are 4 adjusters 2 in the front and two in the back. The headstock also sits on 4 wedges . Ive been able to loosen 3. The bolt in question should be somewhere underneath the oil...
  2. S

    Ezpath 2 programming

    Ive been working my way through the software , I went through all the “do events “ , im currently trying to create a threading program in mdi, When i start the program it will move in the x, then in the z . The program will stop… i have to hit enter, the x will retract and return to 0 on z. For...
  3. S

    Bridgeport romi ezpath 2 encoder values?

    Its actually doubling , .001 would be .002 than .004 etc
  4. S

    Bridgeport romi ezpath 2 encoder values?

    Hey guys i was going through my checks and i noticed the y axis is off .001, if i move .001 with the handwheel , the carriage moves .00196, its repeatable , just off. Has anyone ever experienced this ?
  5. S

    Bridgeport ezpath lathe manual ?

    Hey guys , picked this up yesterday from the original owner. Came with tool post and holders , buck chuck and an air powered collet closer for 4k . Works awesome. Does anyone have a pdf of the operating manual i can have
  6. S

    Tramming a mill without moving the head ?

    I wanted to correct some information.... the table is 4 thousands high on the back side, which would indicated the saddle is sagging from wear. I don't know if there's a way to correct this other than shimming the work piece
  7. S

    Eagle anilam crusader m help

    Yes I did , the quill feed has a travel switch , it shutoff power to the motor
  8. S

    Eagle anilam crusader m help

    Yes , I'm not getting power to the contactor, I'm trying to figure out in all of that mess, what powers it
  9. S

    Eagle anilam crusader m help

    So I'm in the middle of repairing the cnc aspect of the machine, it's an eagle 54x10 with an anilam crusader m controller ,all of the pcbs are out for repair , inspection. I've been using the mill manually for a few weeks and last night it wouldn't turn back on. The front of the machine has a...
  10. S

    Eagle Cnc machine 54x10

    I'm looking at this machine , it's in really good shape , box weighs ... 30 taper. Barely used. Comes with the vise and a crazy amount of tooling. I know the anilam crusader is an older system. What is a fair asking price for this ?
  11. S

    First time scraping

    Yes there are scratches , I think those came from the stone I was using to remove burrs. I'm just using a biax 20 blade . This is steel, it came off the mill , surface finish was shit.
  12. S

    First time scraping

    I'm a nurse by trade but I love messing around in the garage , I always wanted to learn how to scrape. I got myself a grade a surface plate and a biax hand scraper. This was taken off of the mill , it had a lot of surface imperfections.... I just wanted to get the feel for it. How am I doing...
  13. S

    Jet GHB-1440a reversing switch wiring

    Watch the magnetic contactors when you turn the lathe on, there should be one for forward and one for reverse. It's possible that the wiring is not correct the coil . Check for line voltage at the magnetic starters. Post pictures of the switch terminals
  14. S

    Tramming a mill without moving the head ?

    I did just tighten the gibs ...
Back
Top