Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
sinha's latest activity
-
S@sinha Absolutely! I have wholeheartedly recommended your materials many times.
-
Ssinha replied to the thread CNC Lathe - Setting Y value of cutter.Download this eBook. It is FREE, till this Friday. It has a lot of useful information. The figure I posted earlier was copied from this...
-
Ssinha replied to the thread Work co ordinate setup.All newbies should download this eBook. It is FREE. The free offer is available till Friday. Since it is an eBook, it is infinitely...
-
Ssinha replied to the thread Looking for advice, New to Fanuc, did a 120 block program today..Download this for FREE. The free offer is available till Friday. Since it is an eBook, it is infinitely searchable. You can straightaway...
-
SThis may be obvious from what sinha offered, but what he's showing only applies to tools with the shank width that the turret was built...
-
Ssinha replied to the thread CNC Lathe - Setting Y value of cutter.On a 2-axis CNC lathe, if there is no misalignment, the tip of the tool passes through the spindle center, when advanced radially...
-
-
Ssinha replied to the thread Looking for advice, New to Fanuc, did a 120 block program today..Every program involves G codes, with or without macro features.
-
SEasy. We have a newbie who is very unfamiliar with CNCs.
-
Ssinha replied to the thread Free CNC resources.The next FREE offer is as per the following details on ALL amazon sites ... (CNC Lathe Handbook) This is one of my most popular books...
-
-
Ssinha replied to the thread Mirror in Y-Axis issue- Fanuc.Please post the drawing, with the WCS marked on it.
-
Ssinha replied to the thread Mirror in Y-Axis issue- Fanuc.If your mirror plane is at Y100, then Y150 would mean Y50. Mirror plane at Y0 is less confusing.
-
Ssinha replied to the thread Mirror in Y-Axis issue- Fanuc.Yes
-
Ssinha replied to the thread Work co ordinate setup.He is perhaps saying that G55 changes to G54 after reset. How to prevent that?
-
Ssinha replied to the thread Lathe threading insert for getting close to a shoulder..Full-profile inserts have a limitation that they are generally suitable for a particular pitch. They do make perfect threads, though.
-
Ssinha replied to the thread Mirror in Y-Axis issue- Fanuc.This M code for mirroring is MTB-defined. Please read their manual to find out if you missed something. Fanuc uses G51.1 for mirroring...
