Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
thanvg's latest activity
-
Tthanvg replied to the thread Deckel FVT2 dividing head nose dimensions?.Mine as well.... Would have never imagined this, deckel guys seemed to have some fun from time to time.... Bruce had made a backplate...
-
-
Tthanvg replied to the thread Deckel FP1 collet / Deckel SO.Afaik there were some 16 mm similar collets for an old high-speed head. Apart from those, all 20 mm 'deckel' collets are the same. I...
-
Tthanvg reacted to DeadMahoDude's post in the thread Resurrection of a lobotomised Maho 600T with
Like.
https://www.practicalmachinist.com/forum/attachments/20230912_170430-jpg.408397/ Are those box ways bolted onto the main casting... -
TThey are press fits, not threaded. You know this as there is no mechanical way to install them by the makers had they been threaded...
-
Tthanvg replied to the thread Maho MH300 vertical head alignment pins.take it easy and they'll come out easily if you don't use ape force there is no fear (most of the times) of damaging something
-
Tthanvg replied to the thread Maho MH300 vertical head alignment pins.yeap, I'd assume you use a slide hammer puller to pull it out. or, if you are sure about the hole bottom drop a ball in there and just...
-
Tthanvg reacted to slawekgonet's post in the thread Maho MH300 vertical head alignment pins with Like.
That's correct, but unscrewing these does not loosen anything. There is another, bigger thread inside accessible after I remove these...
-
Tthanvg replied to the thread Maho MH300 vertical head alignment pins.I can see some screws in these pins, no?
-
Tthanvg reacted to mjautek's post in the thread Deckel roll engraving attachments GVW GVWU - instructions with Like.
I got the manual in a trade something like 5-6 years ago and as luck would have it, I picked up two roll engraving attachments about a...
-
TNo problem. Did fine. No records at pull away, but handled the pull just fine. Don’t know the year, just a truck to me. Cheers Ross
-
TThis thread is for Leitz optical rotary table info, pics, descriptions, etc. I will start it with a description of the 20” optical...
-
Tthanvg reacted to gombault's post in the thread Deckel FP41NC retro fit with Mach3 need help with electrics. with Like.
Hi I am Marcel from South Africa, I am retrofitting a FP41NC mill with Mach3. I do not have a wiring diagram so I traced the wiring the...
-
TNewest member of the shop: It was originally mfd. as an automotive head machine, but it did not come with an air table. Which is fine...
-
THow is it a Maho? The name on it is Klopp. What’s the relationship with Klopp (which happens to be my family name).
-
Tthanvg replied to the thread FP1 bogging down.If it does not improve with spindle gears in neutral then it's not the spindle binding, that's good news (I assume it's plain bronze...
