What's new
What's new
By:
Advanced search…

Search results

  1. C

    WTB Haas TM1p or Mini Mill

    No longer looking. Thanks. Can take this add down.
  2. C

    TsugamiBS32 for sale SoCal, other swiss machines, manual Hardinge lathes

    Its a early model Hardinge HLVH, the post says 4500
  3. C

    WTB 3ph 208v Coolant Pump

    Looking for a coolant pump for my Mazak. Would like to get a 3/4hp pump. 208v, must be 3 phase. PM if you have you want to sell.
  4. C

    235 Tool Index LS Malfunction Mazak QT 8 T2

    Any recommendations for good sources for the relays? After reviewing my manual and your post. I think these would be worth confirming that they are functioning correctly: The solenoid valve for the turret that handles the clamp and unclamp. and these switches: PRS 4 - turret clamp...
  5. C

    235 Tool Index LS Malfunction Mazak QT 8 T2

    I checked the turret. It only drops 0.004” when unclamped. How are SSR tested? Do you just replace them since they seem to be cheap enough?
  6. C

    WTB Haas TM1p or Mini Mill

    A friend is looking for a CNC mill to learn on and mess around with. Preferably a TM1p or Mini Mill. Up to 30k budget, looking for machines within 3hrs of Brooklyn NY 11211. 2013 and newer please. PM if you have something you want to sell.
  7. C

    235 Tool Index LS Malfunction Mazak QT 8 T2

    I’ll have a look next time I run it. If I turn off the machine and wait some time and power it up again, it will start indexing fine again, but will throw the alarm again eventually. It also doesn’t seem to be in certain tool positions. How would one begin to trouble shoot the turret system...
  8. C

    235 Tool Index LS Malfunction Mazak QT 8 T2

    I’ve been running into this alarm, 235 Tool Index Malfunction, on my QT8 T2 control. The turret fails to unclamp when Turret Unclamp is pushed or the turret is indexed. The hydraulic system is working as it should. This alarm only comes on once in a while, but it’s starting to show up more...
  9. C

    Heavy 10 with D1-3: collet closer

    Start looking for a 10ee 5C collet nose, order a 5C drawbar and make the handwheel. The original SB lever collet closer is for decoration purposes only, in my humble opinion. You will end up with a better unit than a lever style.
  10. C

    Mazak QT15 (T2) Bar Pull - OP1 Setting???

    Well, the M6 and M7 commands now work, but now I get a 235 Tool Index LS Malfunction and my turret wont index. 🤣
  11. C

    Mazak QT15 (T2) Bar Pull - OP1 Setting???

    I just ran into this same problem on a 88' T2 QT8. Programmed M6 and M7 and the machine just stalls and stays there. I did place a spindle stop before the M6. Changed OP 1 from 0 to 1 and no difference. My machine does not have drawbar sensors. Can someone please share a clear picture of their...
  12. C

    5C Collet Pressure Mazak QT8

    Just set up my 5C collet nose on my QT8, any recommendations on a safe drawbar pressure range for 5C collets?
  13. C

    WTB SB 13 Taper Attachment Bed Clamp

    Thanks for the tip but I prefer to buy it. I have enough machine work on my plate already.
  14. C

    WTB SB 13 Taper Attachment Bed Clamp

    Looking for a taper attachment bed clamp for a SB 13” lathe. PM if you have one that you want sale. Thanks
  15. C

    WTB 10ee Steady Rest for square dial

    Bump, still looking
  16. C

    10EE stuck camlock

    Since he may need to get a spindle cam loc once he gets this off, any sources for good new replacements?
  17. C

    Taking a poll of those interested in a 10EE Follow Rest casting.

    This is what I have for the original square dial rest. Using pics as reference, and the measurements I took from a square dial 10ee.
  18. C

    Taking a poll of those interested in a 10EE Follow Rest casting.

    @Brandenberger Any chance you may be interested in lending your follow rest so that I can take dimensions from it? or anyone else what to lend their square dial follow rest? I want to use it as a reference and it would be nice to have a 3D model of the original.
  19. C

    Taking a poll of those interested in a 10EE Follow Rest casting.

    This is as far as I got today with the limited time I had available with the 10ee. The spindle to saddle location needs to be double checked because I suspect I'm +/- 0.015" off center left to right, the height is probably within a few thou.
  20. C

    FS Renishaw MP 11 probe

    pm sent

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2023 Copyright Practicalmachinist.com. All Rights reserved.

Top