Largest Manufacturing Technology Community on the Web
Stay Connected:
Search results
-
Safe hoisting load on this truss beam
If it is doubtfull that truss beam can hold 1300kg I would not trust it with snow on the roof eighter Peter- Peter from Holland
- Post #11
- Forum: General
-
Deep hole grinding
Unless blind holes I would think honing Peter- Peter from Holland
- Post #2
- Forum: Abrasive Machining
-
Good Quality Drill Press
Alzmetall is nice But I like my Strands better Small footprint.ejecting device and workheight adjustable And a better speedrange as many of the older Alzmetalls Peter- Peter from Holland
- Post #12
- Forum: General
-
heidenhein LS803 and LS803D
Aha Not the early Heidenhain I know the TNC 113 has jumpers I do not know on others- Peter from Holland
- Post #9
- Forum: Deckel, Maho, Aciera, Abene Mills
-
heidenhein LS803 and LS803D
Perhaps I try it sometime Just to check 😊 Peter- Peter from Holland
- Post #7
- Forum: Deckel, Maho, Aciera, Abene Mills
-
heidenhein LS803 and LS803D
I only replace the runner in general Perhaps I have a working one somewhere in my pile of Heidenhain scales The D in LS803D stands for Doppelt perhaps ???- Peter from Holland
- Post #5
- Forum: Deckel, Maho, Aciera, Abene Mills
-
heidenhein LS803 and LS803D
I thought so but I wanted to be sure I need a LS803 runner then Thanks Another question Is the difference in the scale The runner or both ??? I presume both but not sure Peter- Peter from Holland
- Post #3
- Forum: Deckel, Maho, Aciera, Abene Mills
-
heidenhein LS803 and LS803D
What is the difference between the 2 I need to replace a runner But just where the D might b the nameplate is damaged It is on a 753B readout- Peter from Holland
- Thread
- Replies: 8
- Forum: Deckel, Maho, Aciera, Abene Mills
-
Hofmann Minibalancer MI 2000
On most of these kind of wheels I see dimples drilled into them for balancing No through holes Very elegant IMHO Why do you oppose to this methode ? Peter- Peter from Holland
- Post #7
- Forum: Abrasive Machining
-
Good Quality Drill Press
For general use I could advice Arboga or similar ones With a RPM from 100 to 2500 able to do drills from 2 to 25mm Round colomn but not a flimsy rack And with a gearbox So no slipping V-belts I also like their way to eject the morse taper And the head can be lowered or raised for a...- Peter from Holland
- Post #4
- Forum: General
-
Need help for the new pointless toy: LKD/S
You know how to solve that don't you ?- Peter from Holland
- Post #21
- Forum: Deckel, Maho, Aciera, Abene Mills
-
Tips on balancing a 10" diameter (250mm) 3000 rpm pulley?
Or remove material by drilling (blind)holes Looks better IMHO Peter -
Advice on potential Schaublin 135 purchase
I sure hope you have bought it by now $1400 is a steal Even for a parts machine Peter- Peter from Holland
- Post #11
- Forum: Schaublin, Cazeneuve, Weiler, Graziano, Mori Seiki
-
Advice on potential Schaublin 135 purchase
Schaublin 135 1400 bucks BUY BUY BUY BUY -
We finished cleaning the Schaublin 135
AFAIK 5C was a option. I did have others with 5c BTW I would be happy to ship it to australia. Might be cheaper as inland transport from east to west -
Broken power feed gearbox on manual mill. VFD or BLDC?
If you want rapids I would go for a 3000rpm DC motor Ratio between rapids and slowes t feedrate is 300 on a Deckel FP3 (5-1500mm/min) Keep that in mind if you pck any Peter- Peter from Holland
- Post #3
- Forum: Transformers, Phase Converters and VFD
-
OD and ID turning a large thin wall tube
Some tag welds will do Like 20 to 30 % of a full pass With decent amount of filler material Peter- Peter from Holland
- Post #9
- Forum: CNC Machining
-
Need help for the new pointless toy: LKD/S
Trying No luck so far at €1750 I wish you bought the Hauser :D I would hate to scrap it- Peter from Holland
- Post #13
- Forum: Deckel, Maho, Aciera, Abene Mills
-
spindle bearings
If the spindle and housing is still smooth No pitting, send it out to Singer for a rebuild Very acceptable prices and . Yes At the end I want to sell something But I am one of the few which give a 3months warrenty on the machines I sell If it brakes you bring it over and we fix it That...- Peter from Holland
- Post #13
- Forum: Deckel, Maho, Aciera, Abene Mills
-
Grinder alignment after been taken apart
Time to call back the guy that took it apart Or is that you ? Peter- Peter from Holland
- Post #4
- Forum: Abrasive Machining