What's new

Search results

  1. TexasMachine

    HAAS ST10Y Error 9993 Spindle Brake Engaged When Tapping

    This BS makes no sense, we keep getting this error but solve the problem each time with a different solution but we are not even sure of the solutions having had an effect at this point. The only definite repeatable observation that I have been able to make is that it works when we turn repeat...
  2. TexasMachine

    HAAS ST10Y Error 9993 Spindle Brake Engaged When Tapping

    A guy I work with encountered the same problem today on the same machine. Adding the M15 like I mentioned in later posts did not fix the problem but adding what MaxPrairie mentions above DID SOLVE THE PROBLEM.... Thanks for your knowledge and time, MaxPrairie.
  3. TexasMachine

    Mori MV Junior magazine position error

    I believe I have had same error on mine. Ive had to replace roller guide bearing twice in the tool changer after partner tried to set tools "his way" Now ive got to recalibrate it by adjusting the circuit boards potentiometers and the instructions that I have came across are close to useless and...
  4. TexasMachine

    HAAS ST10Y Error 9993 Spindle Brake Engaged When Tapping

    It ends with an M30. The M15 I added at the end of the toolpath right before the tap, fixed the error. Like I mentioned, I would just really like to understand what was or was not happening and the real root of the problem instead of me documenting this situation and the fix as me throwing...
  5. TexasMachine

    HAAS ST10Y Error 9993 Spindle Brake Engaged When Tapping

    I added an M15 at the end of the Q drill before the tap and that solved the problem. Not sure why it works there and not before G84 in tap operation but it seems fine now. I just wish I completly understood the why and hows of it. I really appreciate the help.
  6. TexasMachine

    HAAS ST10Y Error 9993 Spindle Brake Engaged When Tapping

    Something is happening between top of program and tap that is causing error because i can reset and start at top of tap and it will run just fine but if i reset and run program to tap i get the error.
  7. TexasMachine

    HAAS ST10Y Error 9993 Spindle Brake Engaged When Tapping

    Before i removed m19 I reset, spun the spindle up forward then reset and went back to tap and this time it oriented and then tapped just fine, so now im lost again because I thought I would get the error everytime it visually oriented before attempting to tap.
  8. TexasMachine

    HAAS ST10Y Error 9993 Spindle Brake Engaged When Tapping

    no luck with m19. now im going to try without m19 and rigid tap repeat setting off.
  9. TexasMachine

    HAAS ST10Y Error 9993 Spindle Brake Engaged When Tapping

    My Rigid Tap Repeat setting is on, I am turning it off and adding an M19 (Spindle Orient) before the G84 and see if that changes anything. (I think the M19 I mentioned adding erlier was added before the M00)
  10. TexasMachine

    HAAS ST10Y Error 9993 Spindle Brake Engaged When Tapping

    Thanks for the quick reply. After your recommendations I am still getting same error but I have noticed that every time I get the error the spindle spins then locks up right before alarm. After I reset and start tap again, the spindle does not move at all before correctly proceeding to tap. So...
  11. TexasMachine

    HAAS ST10Y Error 9993 Spindle Brake Engaged When Tapping

    Here is previous tool code. Thank you.
  12. TexasMachine

    HAAS ST10Y Error 9993 Spindle Brake Engaged When Tapping

    I will have to get back with exact code tomorrow but it starts with a face, OD, spot drill, drill, radial live spot, radial live drill, regular drill again to clean up hole then tap. You are correct about M00 before apply oil. I believe there is also an M155 before the M00 Thanks for the help.
  13. TexasMachine

    HAAS ST10Y Error 9993 Spindle Brake Engaged When Tapping

    I have ran program smoothly in the past and the only thing that has changed that I can think of is HAAS recently came out and updated machine to the lastest NGC software.
  14. TexasMachine

    HAAS ST10Y Error 9993 Spindle Brake Engaged When Tapping

    This is probably something simple that I am overlooking but I keep getting Spindle Brake Engaged Error after applying oil and starting tapping operation. I have tried m15, m19 and no luck. If I reset and start program back at that operation it works fine, then errors again on the next part...
  15. TexasMachine

    Mori seiki Mv Junior error light on

    I believe you need to 0 keep relay 8 maybe. Disregard previous post about air pressure.
  16. TexasMachine

    Chuck Identification - Does anyone know the name of this or have any insight?

    Picked up a lathe with this chuck on it and trying to identify what it is, what its for, is it homemade or bought etc. Thanks for any insight.
  17. TexasMachine

    Static converter ok to run a Hardinge ASM?

    Also curious about this. I have 98 Mori Seiki - CL200 and would like to do some control and simple function testing because it needs some work. It will be moved to proper 3 phase once I have got everything working correctly. Im looking for the minimum I could use to complete these tasks.
  18. TexasMachine

    Mazak Quick Turn 18N From NASA Re-Initialization Parity Error

    We will try to give that a shot today or tomorrow evening and see where we end up. Thank you for the advice.
  19. TexasMachine

    Mazak Quick Turn 18N From NASA Re-Initialization Parity Error

    Is there anyone that knows if "Erase All" is missing right here in step #11? In every other step it is needed in order to be able to enter -9999 so in step #11 this bulletin is just telling me to press the buttons-9999 without anything being entered on screen.?..?
  20. TexasMachine

    Mazak Quick Turn 18N From NASA Re-Initialization Parity Error

    No. We had to go through a bunch of clearances, background and citizen checks. They made sure they knew where it was going and what it was doing. It has just been sitting since 2019 until this January. Im thinking it just needs a little pat on the head and a slap on the ass. Im just trying to...
Back
Top