What's new

Search results

  1. B

    QT15 T2 Powers up no alarms but still can't move any axis?

    If both on and off buttons is lit you schould check all auto fuses i the electric cabinet (Could be on the door aswell) and your 24v power supplies. The lights should be like this at startup. Power off button = off Power on button = on I Ready = on Home button = on
  2. B

    Adding EIA/ISO and DNC to a Mazatrol M2

    That was really smart :)
  3. B

    Adding EIA/ISO and DNC to a Mazatrol M2

    Here is an example on a subprogram on T3 milling 90 small slots. O0012 (PREPARE DATA) G53 G30U0W0 M201 G28H0 M8 G30U0W0 T1001 G98 G97S1500M13F150 (PRG DATA) G0X36.0Z2.0C0 M98P13L90 (EXIT DATA) M9 M205 G30U0W0 M202 M30 O0013 G0U-3.0 G1W-10.0...
  4. B

    Adding EIA/ISO and DNC to a Mazatrol M2

    T2 does not have macro variables. But you can do sub programs with incrimantal masurements and repeat that sub program for example. If you machine can do a spindle orient M19 is the way. You can try pressing the test button (MDI) and type in M19 and then press cycle start.
  5. B

    Adding EIA/ISO and DNC to a Mazatrol M2

    Eproms: https://hagstromsystems.se/_Files/Mazatrol%20T2%20EPROMs.zip Manual for EIA/ISO: https://hagstromsystems.se/_Files/MazakQT10N1986ProgramingManual_MazatrolCam_EIA-ISO.pdf You also need to change a OP parameter from 0 to 1 but I dont remember which one it is, you find it in this forum...
  6. B

    Adding EIA/ISO and DNC to a Mazatrol M2

    I can send you the files for EIA/ISO if you want to burn your own eproms or I can sell a set of chips you want. You still need the FX17 board to add EIA/ISO to a T2 machine.
  7. B

    T32 tool ID

    I have a Multiplex 620 T32-6 that are missing both tool sensors and to be able to do quicker setups I want to mount capto holders to have some tools preset. When I do the programs I can set a tool ID (A,B,C etc) but when I try to add a tool in the tool setup I get en error messege. Anyone know...
  8. B

    mazak qt18n lathe error code 609 sequence data

    What controller is it, T2, T32 or T+? How do you do it, by pressing spindle start button?
  9. B

    Add thread milling to Mazatrol T+ and later

    Hi, I have made macro to kind of add the thread mill function into my Integrex with T+ that I thought worth sharing with anyone here that needs it. So far I have only made a macro for threads on the face. It works like this: You call the first sub program from Mazatrol with som arguments like...
  10. B

    Freqrol Drive question.

    My guess is that one of the DK-434 that controls the power transistors whent dead and left that transistor open all time. Change all power transistors and all DK-434 and you are probably good to go. You can find both transistors and DK-434 on ebay.
  11. B

    Mazak no EIA

    Do you have DNC on that machine? Or is you refering to the FX17 board?
  12. B

    Slant Turn 50: T32-2 control - Z axis moves .083 less than commanded - wrong encoder line number specified ?

    Great to hear you sort it out. When you are happy with all parameters you should store them into the eeprom so you can easy get them back if it happens again :)
  13. B

    Slant Turn 50: T32-2 control - Z axis moves .083 less than commanded - wrong encoder line number specified ?

    There is only one way to find out ;) Change to half or double, reboot and see if it moved different.
  14. B

    Mazak 10N ATC-MC parameters - recovery

    You change 2 eprom chips. I can provide you with this but I need to know if you have the FX784-8 and FX784-9 or the newer FX884.
  15. B

    Manuals for Integrex 30Y

    Thank you very much anyway, looking for these files :)
  16. B

    Manuals for Integrex 30Y

    Thank you very much :) Do you have the rest of them aswell?
  17. B

    Mazak 10N ATC-MC parameters - recovery

    I dont think there is many of these in Sweden but I have 3 of them. (2 in production and 1 for spares) Do you have eproms to change language? I think the parameter page you are talking about will go away when you enter the parameters I sent you. I have seen that page before on my machine aswell...
  18. B

    Mazak 10N ATC-MC parameters - recovery

    And yes, a lot of parameters need to be adjusted to your machine, these are only something to start with.
  19. B

    Mazak 10N ATC-MC parameters - recovery

    You did ask for parameters for in a thread of QT10ATC so that is what you got. What page is missing? Why dont you want to answer why the machine language is Swedish? Where is this machine located?
  20. B

    Mazak 10N ATC-MC parameters - recovery

    Here is my parameters. But I am still wondering about the Swedish language in your machine :)
Back
Top