What's new

Search results

  1. F

    Brother B00 sub-programs above 9000

    Thanks Couch, that worked for 8000 to 8999 programs, which will work for me. Looks like the B00 does not support 9000-9999? At least Brother Comm 3.0 does not. When I try and use a program above 9000 it says enter proper program number or something like that.
  2. F

    Brother B00 sub-programs above 9000

    I have a TC-22B-0 with a B00 control. Trying to transfer a couple sub-programs into the machine but it won't let me. I can transfer them with program numbers less than 8000, but not above 8000 or 9000. Fanucs have a 3202 parameter to lock edit of subs above 8000. Is there a similar thing with...
  3. F

    Need Help Cincinnati Milicron

    Does it have air on it? I have a Acromatic 950 that will not start hydraulics if there is no air pressure. My 950 also has a board with a bunch of Mercury filled relay switches in it that like to go bad. I'm thinking the hydraulic contactor goes through that. (Assuming the 850 has the same...
  4. F

    Brother TC22B-0 B Axis servo alarm 204

    Update: Jason was able to work his contacts and get info from Tsudakoma Japan. Turns out my parameters are correct. Unplugging the B Axis cables had no effect and neither did resetting the encoder. The dip switches and the rotary switch on the amp are all set correctly, so at this point the...
  5. F

    Anyone using a Tsudakoma RT200B Rotary Table?

    Update: Jason was able to work his contacts and get info from Tsudakoma Japan. Turns out my parameters are correct. Unplugging the B Axis cables had no effect and neither did resetting the encoder. The dip switches and the rotary switch on the amp are all set correctly, so at this point the...
  6. F

    Magnetic fixturing (not magnetic chucks) for CNC milling?

    I once had to machine a 8" x 2" x 12' piece of CRS down to 7-1/2" x 2" x 12'. I took an 1/8" skim cut on one side and when I released the clamps it curled like a banana. About 1-1/4" the hard way.
  7. F

    Anyone using a Tsudakoma RT200B Rotary Table?

    Thanks All for the tips on this. I haven't tried resetting the absolute encoder. Not sure how to do that. Jason at Yamazen had tried contacting Koma and they didn't seem to have a record of this particular rotary table. He had another contact at Yamazen, I think, that had some deeper contacts at...
  8. F

    Brother TC22B-0 B Axis servo alarm 204

    With help from Jason from Yamazen I was able to get the B Axis disabled and get my new best friend moving. Got it to home. Got some cleaning to do and will try a tool change tomorrow. I did start another thread for the Tsudakoma RT200B rotary table on this. Anyone using a Tsudakoma RT200B on a...
  9. F

    Anyone using a Tsudakoma RT200B Rotary Table?

    Hi All, Not sure of proper protocol, so please excuse if I muck this up. Previous thread here. Brother TC22B-0 B Axis servo alarm 204 First mad props to BrotherFrank and Jason from Yamazen for the help so for. They helped me get the B Axis disabled, so I can at least get it to home and move...
  10. F

    Why is Spindle Taper Getting Banged up & How to Clean Up

    On fixing the spindle I've used Catt Spindle Grinding a couple times. I know they travel all over country doing jobs. Catt Spindle Grinding | Spindle Grinding Service & Repair There may be someone closer to you that does the same thing.
  11. F

    Brother TC22B-0 B Axis servo alarm 204

    20 minutes away from Novi. That is what I was looking for. Thank you good Sir!
  12. F

    Brother TC22B-0 B Axis servo alarm 204

    Thanks eaglemike. So what happens when you hit estop on a brother? Does it kill the servos or just stop moving?
  13. F

    Quality difference of collets?

    For Pull Studs check out JM Performance. Those are the only things I use. They are a little different than the normal pull studs in that they push the threads down into the bore of the tool holder a bit and relieve the threads near the flange. It helps stop the pull stud from bell-mouthing the...
  14. F

    Brother TC22B-0 B Axis servo alarm 204

    Hi Folks, new to me Brother TC22B-0. Picked it up at auction last year and getting it powered up for the fist time. I've got a B axis servo alarm 204. The book says that is a Multi-turn limit unmatched error. As in, the turn limits of the encoder and drive do not match. When I first powered...
  15. F

    wire edm speed through thick material.

    Drill then bore Late to the party here, but with the half round keys you could drill the 6 holes with solid carbide drill then bore that 3" hole. (Maybe waterjet a 2-1/4" hole in the center.)
  16. F

    K&T 205 S12 Universal mill for sale!

    How about now, is it still still available? I'm not too far away.
Back
Top