Largest Manufacturing Technology Community on the Web
Stay Connected:
Search results
-
M
How long have you been machining?
$4.86 was good dough for an 18yo in '79 imo. Sent from my SM-G955U using Tapatalk -
M
New to me Rivett 1020S.
Machine it or shims. Sent from my SM-G955U using Tapatalk- mccolld
- Post #9
- Forum: Monarch Lathes
-
M
New to me Rivett 1020S.
I wonder if a 10EE tailstock would work? Sent from my SM-G955U using Tapatalk- mccolld
- Post #2
- Forum: Monarch Lathes
-
M
Need help-extracting hardened screws.
I'd put some heat on the Al. That should expand quicker than the screw and breakdown any adhesive. Sent from my SM-G955U using Tapatalk -
M
10EE headstock bolt tork
I have the gearbox off my 10ee so the headstock bolts are easy to access. The previous owner had removed the headstock sometime in the past. I'd like to check the tork on the bolts before reassembly. Anybody know the tork specks for the headstock bolts in the motor compartment? Sent from...- mccolld
- Thread
- Replies: 1
- Forum: Monarch Lathes
-
M
Bidding cOpen on machinery, include 3 10EE 80's vinrtage
I've looked everywhere but can't find it. What's the website to get on the list? Sent from my SAMSUNG-SM-G530A using Tapatalk- mccolld
- Post #7
- Forum: Monarch Lathes
-
M
10EE gearbox
Also, I find it very incredulous that the key would land in that spot. Sent from my SAMSUNG-SM-G530A using Tapatalk- mccolld
- Post #8
- Forum: Monarch Lathes
-
M
10EE gearbox
Bill, exactly my first thought.......it's just that I don't want to run it on an assumption. I'm a big believer in cause and effect. Sent from my SAMSUNG-SM-G530A using Tapatalk- mccolld
- Post #6
- Forum: Monarch Lathes
-
M
10EE gearbox
Bill, thanks! I have these same prints. What I'm looking for is guidance on how to get into the gearbox. I think it might have been 452-3 that came out but I'm unsure. I can't see down in there. When I took the gearbox off the machine, the key fell to the bottom allowing EE-2773 to...- mccolld
- Post #4
- Forum: Monarch Lathes
-
M
10EE gearbox
Hey guys, I had a woodruff key come loose in the gearbox of my square dial lathe. It prevented me from being able to engage the powerfeed. After a lot of hassel, I fished out out. Before I put it back into the machine, I want too dig into it to determine where it came from and why...- mccolld
- Thread
- Replies: 10
- Forum: Monarch Lathes
-
M
Monarch AA Tail stock refurbishment questions....
Vettbob, maybe I'm overlooking it but how are you getting lubrication to the ways? It appears that your inserts are covering the oil channels..... Or, did you machine them after the scrape job (and photo)?- mccolld
- Post #24
- Forum: Monarch Lathes
-
M
Kearney and Trecker and Milwaukee No. 2 rotary head milling machine.
You could buy a hell of a lot of house for 78k back then. House I grew up in was a fairly nice middle class home and we paid about 18k in '70.- mccolld
- Post #20
- Forum: USA Heavy Iron
-
M
New to me Kearney Trecker 2D milling machine
I read somewhere about being able to jam the gib and lock it up. Mine is locked on both ends to prevent this...e.g. loosen one side and tighten the other to adjust.- mccolld
- Post #53
- Forum: USA Heavy Iron
-
M
Kearney and Trecker and Milwaukee No. 2 rotary head milling machine.
I have the original bill of sale for mine. $78,000 1958 dollars. I'm guessing that's like $800,000 (or more) today's dollars.- mccolld
- Post #16
- Forum: USA Heavy Iron
-
M
New to me Kearney Trecker 2D milling machine
Also, ill bet your x travel issue is in the gearbox/motor because there must have been a hell of a lot of force on it to make that break. In fact, I wonder if that 3/4 hp motor could even do it!- mccolld
- Post #50
- Forum: USA Heavy Iron
-
M
New to me Kearney Trecker 2D milling machine
Calmac, I took a closer look at you spindle tonight. Yours uses collet nuts so the collets are k&t 30 taper.- mccolld
- Post #49
- Forum: USA Heavy Iron
-
M
New to me Kearney Trecker 2D milling machine
Ramsay1, yours has a drawbar, right?- mccolld
- Post #47
- Forum: USA Heavy Iron
-
M
New to me Kearney Trecker 2D milling machine
That serial number looks pretty standard, format wise. First time I've seen one with 50 hz motors.- mccolld
- Post #46
- Forum: USA Heavy Iron
-
M
New to me Kearney Trecker 2D milling machine
Jager, those square things in your box are trips/stops for the rotary head. They fit in the groove above the degree scale.- mccolld
- Post #42
- Forum: USA Heavy Iron
-
M
New to me Kearney Trecker 2D milling machine
That motor on your X power feed is definitely not original.- mccolld
- Post #41
- Forum: USA Heavy Iron