Thanks, I appreciate the feedback. I thought that it is going to swell to 10 though or 200 though so I might as well stop it when I can. I understand the material has to go somewhere so I might put a .125 stip down the middle of the round die. But, I have no experience with this so I...
I am building a die to bend 1" square, I have a 8" O.D. x 2" Round die that I have machined a 1.05 inch wide by .5 inch deep groove. *I was going to make the back plate 4" long and machine the same groove into it. *But the truth is I am just guessing, I want to know if anyone could tell me if...
I am making a Little skid steer like machine and I need help with deciding what kintd of relief valves to use. Both motors do have have case drains but I am not sure if you can use the case drains as relief valves. If not should I use motor spools, (which dont seem to come standard with many...
I think I am going to have a cylinder to turn my drive wheels 90 degrees so I can drive it out of my shop or out of my yard, I am going 13 feet wide so I can drive over a semi and still have enough room to get forks in from one side.
I am looking to build a drivable gantry crane and want to make 2 of the wheels on idlers istead of skidding them. I will have a drive Wheel on each side of the crane which will be skidding for turning but I do not want to skid 6 feet. I know old cultivators had idler wheels and I think you...
I am looking at getting a 3d printer, and I hear tons of reviews for these 3 in 1 printers. But, I do not see any for sale. does anyone know if there is any out there that are fairly good for very moderate use at a reasonable Price. Thanks
Hello, I do not have much experience with guarding and light sheet metal. I need to make this guard it is about 34 inches high, 28 wide, and 22 deep. It is going on a machine that will do alot of vibrating. I am not sure if I should flare it out where the door closes or if there is some new...
Hello all, like the title says I just got a new 12x36 lathe. I have no clue about different boring bars and tool holders. I would like to know what a good boring bar and tool holder and what kind of carbides that are economical to buy. I will only be working with mild Steel, the tool holder on...
Hello, this is a steering system for a Project I am doing, the material is all .375 x 1 with 3/8 holes. I have always had trouble with tie rod ends and they are expensive. I have seen some bearings on golf carts that pivot in between the linkages but I have no idea what they are called. If...
I am sure the machine has the power. It has a 10 horse 3 phaze motor with a industrial 50-1 reducer. The pinion to the main gear is 100-1. The main gear is 5 inches thick by 38" diameter. It is a rotary draw so I could put a mandrel in it. Anybody know where they sell mandrels that big or...
Hello all, I found a large rotary draw bender. I have searched all over google and I can not find anthing about this size of material being bent. With a inside die what radius do you think I could get away with without crushing, I am bending to about 75 degrees. I am bending it the easy way...
Hello, I Was just curious ir anyone has seen a machine like this. The main gear is 4 inches thick x 38 inch diameter. It has a 5 hp electric motor and a big gear reduction assembly. There aré 2 different adjustable beds and the center hub is interchangeable. The pics aré bad but I just...
Hello all, I bought a 3 phase mill and I only have single phase 240 at my house. I am in mexico, so where I want to buy the VFD nobody can explain anthing to me in english that I can understand. They have a Delta VFD037EL23A which I think is what I need, can anyone explain what it should look...
I found the distributor here, http://www.maquinariacatalogo.com/familias.html which have as a good of a reputation as a mexican bootlegger can have, and they do have parts, which is a good and bad sign.:)
Agreed, some China stuff is Junk, but the machine new is around 7-8,000. This has maybe 30 hours on it. I went to the battery place that used it, they were cutting plastic and moved on to a different idea. I ran the machine, everything was tight and worked great. China also has some of the...
The vise is worth 250 dollars, on all the spanish reviews, it was ranked by leaps and bound above Grizzly and about the same as a Fox machine. I don't think I need to nickel and dime a kid trying to feed his family.
This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. To learn more, please refer to the cookie policy. In case of sale of your personal information, you may opt out by sending us an email via our Contact Us page. To find out more about the categories of personal information collected and the purposes for which such information will be used, please refer to our privacy policy. You accept the use of cookies or other identifiers by closing or dismissing this notice, by scrolling this page, by clicking a link or button or by continuing to browse otherwise.