I have just bought a 2002 Integrex 300 ll sy without knowing the condition of the machine.
And suddenly,i have heard that the machine was flooded ,almost 1/2 machine height...
here some pics
this is the rebuilt thread,i am not a expert ..i am just and end user.Trying to bring the machine back to...
I want to make this type of logo
for example
my current solution is: laser cutting the outside pattern then machining a small fixture that have the same laser cut pattern as above
using silicon to paste the pattern into the fixture
I want to make alot of this logo,so using silicon will take...
I need cut alot of tubes.
Its 1mm thickness,diameter from 25 to 51 mm.
The cut will be like this.
Angle of each side is about 7.5 degrees,so total 15 degrees/ 1 piecut.
Example short side is 18.2,long side is 25.6
But when cutting,the tolerance is too big.It is upto 1mm tolerence
The tube...
Hello you guys.
I am not a wedm guy,i do not have wedm either.but i need to cut alot of piecut.
I send the Titanium grade 2 tubing for wedm to cut into thousand pieces.
The problem is
He used the same setting as he used on steel,wire was broken 3-4 times a day.
But when cutting steel,wire may...
I made a good bend when testing a short piece of tube,its about 12 inch
but when i tested with 30 inch tube,i have wrinkes.
CLR = 2D,tube OD = 30,1mm thickness,titanium grade 2.
1.mandrel and wiper is at good location because test bend is fine.
i think the problem is at pressure die ,but dont...
I've had this issue once.
My machine has side mount tool changer.
When making a tool change command,waiting pot will be opened (Lock off)
The pot is sent back to magazine..and then magazine rotates and send back the pot to the waiting position,then closed (Lock on)...and swingarm exchange tool...
I've a problem.if there were only 1 tool holder(tool in spindle,no tool at waiting location),everything were fine.
But if there were 2 tool holders (both spindle and waiting location), when returning the tool from spindle into waiting spot.it will drop as you see in the video.
What could be the...
I need to make a internal sphere.
Look like this,its link for mandrel assembly.
Which cutting profile to do this ?
Thank you
Gửi từ LG-H901 của tôi bằng cách sử dụng Tapatalk
I have a machine with fanuc O control.
First time,it has alarm 950: fuse break 24e f14.
I have replaced that fuse then it breaks immediately ,i recheck the power supply unit and find out this
Soldering melted and contact each other.
I fixed it as the above picture.
Machine run well a few days...
I've a machine that use fanuc omc
I have edited param 10.4 to 1,there are 2 param : 9000@ 10 and 9001@23390 in data column
How do i view the program in these ?
By the way,is it possible to back up these custom macro program ?
Thank you
Gửi từ LG-H901 của tôi bằng cách sử dụng Tapatalk
I'm going to buy a Taiyo bender it's code name is TB-DR-40NC-H
it was made on 7/1991 .I think it's O-MC control
I can not find any infor about fanuc for tube bender
Some picture:
A big planetary gear,driven by Fanuc 50s servo motor
Tube feed/bend..both are driven by Fanuc AC servo motor
I can bend titanium 1.5D,WT 1mm.
But mandrel's withdrawal is very hard.I am using hydraulic oil for lubricant now.IS there anything better and is easy to find ?
Thank you
My T-slot table is only about 550x450 (xyz travel is 400x400x495)
A used T-slot table with 1250x550 in size is about 320$
Is it possible to expand my current T-slot table by adding this bigger table above the current table ?
Look likes its a good added-functions for old machine.
Anyone have experience with them ?
Thank you
BIG Kaiser Precision Tooling Inc - Next Generation Tooling
I have a mandrel tube bender.
Machine's pressure was set at about 1200psi.
Titanium grade 2: 50mm OD,1mm wall thickness
Clr =1.5D
Mandrel ball diameter is about 47.5mm
Mandrel nose is forwarded about 1cm .
I have tried to bend ss 304 and having the same issues
Heavy wrinkles(buckles) inside...
My problem is spindle drawbar and hydraulic cylinder contact too hard,some times, hydraulic cylinder will wind .
As this below video :
Maybe Lucifer valve problems - YouTube
First i think proximity switch, but it still work (about 2mm range)
I also see a Diagnosis bit that show proximity switch...
This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. To learn more, please refer to the cookie policy. In case of sale of your personal information, you may opt out by sending us an email via our Contact Us page. To find out more about the categories of personal information collected and the purposes for which such information will be used, please refer to our privacy policy. You accept the use of cookies or other identifiers by closing or dismissing this notice, by scrolling this page, by clicking a link or button or by continuing to browse otherwise.