What's new
What's new
By:
Advanced search…

Search results

  1. G

    G18 help

    1.5 inch long line with a .5r arc in the middle of it. Its just following a line, not a surface. % O0 (G18ARC SAMPLE) (DATE=DD-MM-YY - 31-05-23 TIME=HH:MM - 12:55) (MCX FILE - T) (MATERIAL - ALUMINUM INCH - 2024) (T1|1/4 BALL ENDMILL|H1|D1|TOOL DIA. - .25) G20 G0 G17 G40 G49 G80 G90 (1/4 BALL...
  2. G

    Tsugami BO326II Pickoff Collet Sticking. Help!

    I have this exact machine, and I have had this problem on some parts. I made a brass pin to fit in one of the unused subside tool stations. Before parts ejection I go to that station and open the subcollet and then press in the collet face with that tool. just a few thou. as you have seen , a...
  3. G

    Can the Precision Matthews PM-728VT CNC kit able to do micro machining?

    its a toy.
  4. G

    Code needed to update tool offsets in DMG machines in MDI

    Zoller has never sold a toolsetter to a shop with new Mori machines?
  5. G

    supermax max-3

    It says X and Z because it thinks it is a lathe, because you have got 0T parts mixed in the control. Back in 2017 a service call from Fanuc looks pretty cheap now.
  6. G

    NOMURA NN-32UB8 Swiss lathe programming question

    they have swiss lathes in Dubai?
  7. G

    OKUMA MB46VAE 2001 ISSUES

    does it toolchange? like T10 M06?
  8. G

    Haas HPC Pump Air Cylinder?

    some kind of filter
  9. G

    Mori seiki.....grrrrrr.....problems!!!

    I think he would have better luck by caling Mazak. But he did necro/hijack a Mori thread.
  10. G

    Mori Seiki SL-204MC/MSG-805

    without a y axis, it is a mechanical adjustment. you can dnc from the card for big programs, I think it is too old to have the "user area" memory feature.
  11. G

    Arc lead in thread milling.

    I think the problem is there in your Gangfrasm.
  12. G

    Mori Seiki RL2500 MSX 501 Control

    Googled it because I didnt know what a "RL" was. I see red cap motors. So its a Fanuc. on the slightly newer mapps lathes I know there is a page for setting up groups for tool life monitoring and sister tools. I would imagine its on yours but I dont know for sure.
  13. G

    Fanuc 6T Mainboard problems

    I dont have the book in front of me, but I think that is following error. 800 first axis 801 second and if it was an M 802 would be third and so on. It is not your issue.
  14. G

    Fanuc 6T Mainboard problems

    Pulsecoder feedback?
  15. G

    Is probing possible on Fanuc 6m or not? Does anyone have a probe on these oldies?

    I went through the process of turning on the macro b option and getting probing working on my 6MB Mori MV40. For me this involved getting a different set of eproms for the machine software as the version I had didnt support the option. Adding some memory chips on the main board to support the...
  16. G

    Convention for CW/CCW direction for live tools

    do your Moris ignore theses tool rotation settings while tapping also? I classified it under "if it doesnt work all the time its worthless" set them all the same edit the program as needed. We have heads from MD, Alps and Vonrudden. So it is totally a dogs breakfast during setups
  17. G

    Mori Seiki MH-50 With Fanuc MF-M6 Control, Throwing 400, 401 and 414 Servo Alarms

    there is at least one thread on PM about retrofitting a different series Fanuc drive in place of the 6066 series.
  18. G

    Convention for CW/CCW direction for live tools

    Im not sure about how its defined, but sounds reasonable. live tools with a geartrain may not rotate as expected. Depending on design and mounting orientation. Just pay attention during setup.
  19. G

    Fanuc Lost parameters.

    Did you replace the keysheet perhaps? It looks nice and new?
  20. G

    *SOLVED* Fanuc OM-C GoProbe Throwing 115 Alarm

    You should see a 6 run it. Glacial.

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2024 Copyright Practicalmachinist.com. All Rights reserved.

Back
Top