What's new

Search results

  1. P

    My Haas has run with no lubrication since new

    I have a similar situation - bought a secondhand 2007 OM-2A recently and the grease lines are totally clogged. I was able to clear the lines for the Z axis since they are relatively easy to access. When I apply pressure with a hand pump, grease comes out at the lubrication push fittings for...
  2. P

    Getting a 2007 OM-2A up and running

    I really appreciate everyone's replies in this thread. Good info all around! I've still been working on getting my grease system in working order. I've purged the Z axis lines by using a grease gun to force grease through (I only ruptured the plastic lines twice, ha!). When I see grease...
  3. P

    Getting a 2007 OM-2A up and running

    I spoke with tech support from my local HFO (Selway Machine Tool) and they were super helpful in answering my questions. It's a 30k permanent grease pack spindle. The tech support guy gave me some helpful tips on warming up the spindle after prolonged inactivity. He suggested running the...
  4. P

    Getting a 2007 OM-2A up and running

    Well I had no trouble finding the replacement ********* grease cartridge since it's right there on the Haas parts website, but I can't believe I forked over $225 for it. The spec sheet on the website references *********'s Multitop grease, but the cartridge I received from Haas was labeled Mobilith SHC...
  5. P

    Getting a 2007 OM-2A up and running

    Hi guys, Thanks for the replies, I appreciate it! Still trying to fully understand the lube situation on my machine. Here's a shot of the lube panel, which is just the ********* grease pump and an air filter/regulator. There's no oil tank anywhere to be found on the machine. The only line I see...
  6. P

    Getting a 2007 OM-2A up and running

    Hi everyone! Long time lurker, first time poster. I recently purchased a 2007 Haas OM-2A with approx 4500 hours on it, and I'm in the process of cleaning it up, checking it out, and getting it up and running. This is my first "real" CNC mill, although it's probably considered a small toy to...
Back
Top