Guys
Are there any sources for turning holder insert seats that have different thicknesses?
Whenever I use a larger tip radius insert for finishing, I get an ever so small tit in the center.
I know I know, just use a small R insert or shim the holder itself, but it would be so damned convenient...
Guys
I have a family of parts that need to be made from 17-4 and 13-8 bar
For all intents and purposes, the part is 4.5 x 2.5 x .350 thick, with multiple cross sections getting milled down to .062 and .093 thickness.
I am all but certain that this thing will turn into a potato chip just by...
Guys
For some dumbass reason I cannot find out what would be an equivalent for HLP 16 oil?
It is for an air activated - oil dampened actuator so it isn't all that important what brand, just need to add some to the reservoir as I had to dismantle the damned thing and lost some in the process ...
Guys, can someone shed some light on the differences between SAE porting tools?
SCT has 3 versions of them: no pilot, solid pilot and reamer pilot.
Is there a difference in the usage of either one (other than the obvious)?
I've never used these but now have some 50 or so to make. Material is...
Guys
Does anyone have an alternative source for the old style black, full round pushbuttons HAAS used on most older machines?
I for the life of me cannot find any that is low enough to fit into that crammed little space between the cover panel and the gearbox.
At best, it cannot be more than...
Guys, like the title says, does anyone run Bedra Megacut or HEAT wire?
I am having an issue ( same with both wires ) and would like to discuss, (as a private message at first) if possible.
Thank You!
Guys, does anyone have experience with soft starters, specifically these ones by Automation Direct: https://www.automationdirect.com/ad...r_soft_starters/compact_soft_starters/sr22-16
I have a 600mm AL upcut saw that I'd like to add a soft starter to to reduce the inrush load on the motor...
Guys, does anyone have experience with soft starters, specifically these ones by Automation Direct: https://www.automationdirect.com/adc/shopping/catalog/drives_-a-_soft_starters/ac_motor_soft_starters/compact_soft_starters/sr22-16
I have a 600mm AL upcut saw that I'd like to add a soft starter...
Guys, let's leave machineability of this stuff alone for a minute.
How hard is this copper and how easy is it to dent or deform it by workholding?
I've got some thin wall ( 3" dia x .140 wall ) parts to possibly quote.
Before I even get to figuring out how to cut it and with what, I'd like to...
This is a question buried in a mild rant...
What the hell happened to shipping charges lately?
Just went to McMaster and put two items into my cart.
10' of 4" dia rubber flexible ducting and 10' of 4" dia clear poly ducting.
Total package weighs all of 4 pounds, fits into a 12 x 12 x 12 cube...
Guys, can someone please recommend a brand/model of an optical comparator of a 14" - 20" size?
I am all but set on the Mitutoyo PH-3500, but looking to see if there is something that fills my wish list.
Need to have:
Horizontal projection
Linear scales with more than just a plane DRO. ( angles...
Guys, I have a Keller cutter grinder, pretty much the same as in this thread: https://www.practicalmachinist.com/forum/threads/keller-die-sinking-machine.334890/
Does anyone by any chance have any idea on how to use this darn thing?
I know the shop it came out of used it daily to put make...
Just went to the FeatureCAM forum and saw that all posts and links to upgrades and the like are removed.
So, then went to the "Products" page, only to find FeatureCAM and Powermill being offered as "Fusion36 with FeatureCAM" and "Fusion36 with PowerMill"
Not that I'm interested in anything ADSK...
Guys
May be a silly question, but can someone explain this statement for me:
https://www.google.com/url?esrc=s&q=&rct=j&sa=U&url=https://www.ring-plug-thread-gages.com/ti-sti-Emhart-pg-24.pdf&ved=2ahUKEwi-pO-X27T-AhWUkmoFHbILBIEQFnoECAoQAg&usg=AOvVaw3lsbc4YchaLv5q8RjzhE0Q
This is from the...
Guys
Does anyone have a wiring diagram of, or "how does it work" for the chuck clamp/unclamp solenoid on a first generation SL lathe?
It is a parker valve, but it only has a single solenoid with 2 wires.
It is a 120V AC coil, so I have absolutely no idea how it shuttles back and forth?
This...
Guys, if I missed a similar thread somewhere, please forgive me.
I am pretty much fed up with one of my pallet jacks and would like to replace it with a good one.
In a nutshell, I have a 27 x 48 Wesco which is a shameless piece of garbage.
For starters, anything with any decent weight ( like...
Guys, would anyone have any preferred brand or type of blade for a fully manual machine?
The machine is not enclosed, 25/50 RPM, uses a 250 x 2 x 32mm blade, coolant is a slow-flow water soluble, material to cut is 303SST - 1/4, 3/8 and 1/2" dia.
The blade I have now is a plane-jane HSS, 130...
Guys, just looking for a general consensus: Do you turn off the coolant before indexing the turret on a lathe or not?
So far, I have ALWAYS programmed an M09 before index, no particular reason, just a habit from the beginning.
What say you?
This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. To learn more, please refer to the cookie policy. In case of sale of your personal information, you may opt out by sending us an email via our Contact Us page. To find out more about the categories of personal information collected and the purposes for which such information will be used, please refer to our privacy policy. You accept the use of cookies or other identifiers by closing or dismissing this notice, by scrolling this page, by clicking a link or button or by continuing to browse otherwise.