Hi All!
So over the years, I've had slop accumulate in my 10EE's crossfeed. Having many other things more pressing, I just worked through it by accomodating the slack in my operation, but the slop seems to have started increasing at times, and I'm getting rather bad at accomodating the math, so...
Hey all-
So some time ago... pert'near a decade... a well-exercised Stryko B-16-10 spot welder was vested upon me.
Data plate says:
Model B-16-10 Style F, no 15124
220v single phase 43A,
10kva @ 50% Duty Cycle, secondary volts 1.4 2.2
6500 secondary amps at 16 throat 6 gap,
It had...
Hi All!
Just posting pix of the J.A. Fay #1 bandsaw I've rescued:
Blasting off the loose paint... and there was a bunch. Many layers.
Before anyone asks...
I purposely chose NOT to strip this old gal bare. Why? Because there's original paint under all that. If I strip it bare, then when...
Hi All!
I just acquired a well-seasoned, yet very good condition CNC plasma system, which came with a Thermal Dynamics PAK1000XR. It's rated output is 80A @115v.
The torch on the table is a common inline 'machine' type torch, and I was advised that the type was common a decade or two ago, but...
Hi All-
Recently, I got some inquiries about conversion of the Miller CP-series that are set up for 200/230/460v 3 phase.
If you've read the threads on my conversions of the 230/460v versions of the CP-200, you'll note that there's wiring on the primary side (phasing and capacitors) as well as...
Hi Everybody!
I've had a dozen-or-so inquiries of the status of the moderator of this subforum. Some of you may recognize me- Peter worked with me on various power conversion and drive concepts as early as 2007, many of them posted in the Transformers/VFDs forum. Like others, when I learned...
Okay, so guys frequently send me messages asking me if some particular machine can be converted. When that happens, I take a look at the drawings, sketch a diagram, do a rough calculation of capacitor values, identify wires to move, and then turn 'em loose to try it. I don't mind helping guys...
Hi All-
Question: The backgear gearbox output shaft... some 10EEs have a flat drive belt, some have twin V-belts...
The gearbox shaft... are they all the same? i.e., could one remove a flat-belt pulley from a gearbox shaft and move it to a gearbox that HAD dual V-belts, and vise-versa... or...
Hi All-
For those who build their own RPC, the frequent choice for start-capacitor control is the STEVECO potential relay.
Because it's a for-purpose device, it is often challenged to be used starting some frequently much-larger-than-intended loads in our rotary phase converters. Because of...
Ken Simolo has successfully converted his Miller CP-300 welding supply to single-phase operation.
See his nice writeup about it here:
http://www.practicalmachinist.com/vb/general/successful-miller-cp300-welder-haas-kamp-single-phase-conversion-269124/
Okay, sportsfans-
I have a little 'project' coming up in the future, and one of the possible methods of solving problems, will be to couple a 5hp 3-ph motor to a truck transmission... like an "Erie Drive". I'll be using the transmission to select range, and I'll be driving the 3ph motor via a...
To anyone interested in obtaining materials for building some hoisting/rigging equipment, here is an excellent opportunity-
in Russellville, Ar, we're taking out an overhead sign consisting of two 8" square 1/4" wall posts, and an associated overhead sign.
This is coming down on January 3rd...
Hi All!
Okay, so I might have an opportunity to snag and drag a 40" Bullard VTL home.
Obviously it's too heavy to carry on a tandem-axle 10K trailer... guessing it's somewhere around 25-30K...
How hard is it to break this thing down into small enough bites for me to carry home? If so, how...
Hey Guys- Posting it here FIRST, but gotta get 'em out quickly, so if you're interested, be quick on your response.
In Von Ormy, Texas, there's a truckstop where you'll find a scale with overhead sign, intercom signpost, and some interesting other stuff.
Said sign includes two stout square...
Hey everybody-
Visiting a friend of mine, and he stumbled upon this at a flea market, and I'm wondering what other connecting rods would fit this lathe:
Hmmm... won't let me post... mebbie I need to save the thread first...
Hi All-
The saga continues... now entering my evil laboratory, is a 1969 Miller CP-250TS welding supply, and following the same process as the CP200 and SRH-333, will become a single-phase 240v machine.
Follow along as I post pics, math, and wiring solution for this fine piece'a iron!
So I've got a Millermatic 10 wire feeder.
There's a part that goes ON the feeder, but is not part OF the feeder... that...
1) Has an electrical connection that goes to the supply
2) Has a tube going to the feeder's shielding gas solenoid valve
3) Has two connections that go from the gun's...
This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. To learn more, please refer to the cookie policy. In case of sale of your personal information, you may opt out by sending us an email via our Contact Us page. To find out more about the categories of personal information collected and the purposes for which such information will be used, please refer to our privacy policy. You accept the use of cookies or other identifiers by closing or dismissing this notice, by scrolling this page, by clicking a link or button or by continuing to browse otherwise.