The Deckel FP4MK is cleaned and checked for all functions to work
https://veltmanmachines.com/product/toolroom-milling-machine-deckel-fp4mk-2203-2/
Eighter with a universal table 2038 or a angle table
380Volts 50/60Hz
Looking at €17500 EW
Located in the Netherlands But we can arrange shipping...
My website needed a update and some SEO So I took the opportunity to ad a .com website as well
www.veltmanmachines.com
Next week www.veltmanmachines.nl and www.veltmanmachines.com will get linked
Enjoy and please provide me with some comments about goods and bads
Peter
People ask me to measure endplay on machines I have for sale on a regular base
I always measure with a 0.001mm indicator and lift the spindle with a piece of wood
Not too much force applied
But it is soo easy to bend the shaft a couple of 0.001mm
I try to look for the moment the indicator...
I did some measuring on the Schaublin 102NVM which I have advertised in the for sale section
It has spindleplay of about 0.001 to 0.002mm
I lifted the carriage at different places That variates from 0.1 to 0.05 mm So max wear is ±0.05mm
Backlasch on the crossspindel is ±0.1mm
Runout of the...
We finished cleaning the
102N-VM Tailstock was stuck but just needed some cleaning
A a new stop on the tailstock was made as the old one was broken
We also bought a W25 backplate in Switserland and a new 125mm polish 3-jaw steel chuck
The drawer also has some goodies inside
Set of 50 pc of W25...
I sell some machines to the USA So my customers need to get a custom broker involved
Many times they get invoiced for more as the original quote was
Additional transport costs
Warehouse costs
And they have to be payed on the spot otherwise the transport gets delayed which ad additional...
What is the wide of a pallettruck in the USA ?
Is it different from the 53cm we have here in Europe
I ask to make sure the crates I send over can be handled with a pallettruck
Peter
The Maaslandkering closed yesterday because of high see
This is a huge floating barrieres that closes the harbor of Rotterdam from the sea at high water
Because of a big storm from the north that pushes water onto the coast here
This barriese was finished 26 years ago as the last part of the...
We have this FP3Active all cleaned up
But we ran into a problem while testing it
The powerfeed Z-up jumped out of engagement every time
So we took off the saddle
Easy enough if you have done it several times already
Disconnecing the scale on the X is the most troublesome
It has to be desoldered...
We have this really nice looking and running FP1 In fact really nice running
It is the later model with Iso 40 taper
It also has a dual speed 3ph 220volt motor So 220volts only
Ideal for domestic use in combination with a VFD
But......
There is always a BUT
The motor runs hot and hardly pulls it...
We had this Schaublin 135 bought in France
Its cleaned now Bedways look proper Brakes work
Belts are dry Everythink works Hardly any wear on the ways
Comes with a big set of 5C collets and we put a new DRO on
What do you want more ?
It is for sale as usual...
We finished cleaning a Deckel FP3 2201 active which we bought in Danmark
The machine is from 1979 So 44years old
And I do not think it saw 500 hrs of use
Flaking is all there We removed a piece from the X-slide that holds the Turcite
Not a single evidence of wear
Paint on the top of the X slide...
We have a Deckel FP3 Active (the one from 220Volts from a earlier post)
The PU cover that holds the Y- bellow was broken. 2 big chunks were missing
These covers are no longer available
So I fabricated a kind of partial mould for the missing piece
Then poured in a 2K PU with a filler that...
We always look for cheaper options to crate and ship machines for our customers
We looked into the option to put a Deckel 1FP on a 80x120cm europallet and then create a crate with palletboards About half the price as having a crate made
Well It fits
Bearly
We nailed a piece of plywood on the...
No a milling machine but German
It is such a nice machine
But if I buy it is there still some profit??
I do not need much but some
https://www.kleinanzeigen.de/s-anzeige/thiel-conturex-132-stempelhobel-keine-fraesmaschine-drehbank/2566395311-84-8544
We recently bought a Emco FB3 from the UK Upon my surprise it had this machineplate
WTH Is this a 220v 3ph 60Hz machine ??:angry:
For the US perhaps ??
England has 400V 3Ph 50Hz but it used to be 420 V
Not happy
But now the wierd part
Motortag says
400-440Volt 3ph 50Hz:willy_nilly:
whats...
Like the tittle says I have bought a pristine Birmingham BPV-1054-C milling machine with R8 spindle Variator and powerfeed
No 10 hours in use
I am in Europe but the machine was imported from the USA So 220/440volts 3ph 60Hz
First question is Is it chinese or taiwanese ??
Second question is...
I now have my second Deckel FP4MK ever
From Cambridge university
This one is even younger as the previous one with serial# 2203-8757
I did google several machines to find out what the YOM would be
Later as 1991 at least because some pages in the electrical diagram were dated 1991
I ended up...
This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. To learn more, please refer to the cookie policy. In case of sale of your personal information, you may opt out by sending us an email via our Contact Us page. To find out more about the categories of personal information collected and the purposes for which such information will be used, please refer to our privacy policy. You accept the use of cookies or other identifiers by closing or dismissing this notice, by scrolling this page, by clicking a link or button or by continuing to browse otherwise.