What's new
What's new
By:
Advanced search…

Search results

  1. drzipper

    Alexander FP1 (Deckel) Clone For Sale

    My Partner in England this machine machine for sale, the asking is $8000USD or OBO. I can probably get a very advantageous shipping rate based on my company discount. If Richard says it is immaculate I believe him. Motor is 415V 3~, 2-speed (8-pole/4-pole) Comes with 15+ collets, collet...
  2. drzipper

    Round Head Aciera F4 Power Feed Motor Suddenly Not Running or AtLLING

    The power feed motor has functioned for the last 15 years. It periodically sounds like it is laboring particularly at the top of the Z feed but has always worked. There is a rise in the pitch of the motor sound. Tonight it cut out on the X axis. It has restarted after cooling off. I suspect a...
  3. drzipper

    Aciera F4 Round Head Oil Leak, Need Help

    Aciera F4 Round Head Oil Leak, Need Help, I have a major oil leak, When I fill the head it basically pours out the oil through the rack and pinion and the entire OD of the quill bushing. Does anyone have a section view so I can study where the leak originates? I have a schematic of an F5...
  4. drzipper

    Mobil DTE 24 (ISO 32) versus DTE 26 (ISO 68)

    I'm changing the oil out in the Hydraulic Press, the system spec Mobil DTE 24 (ISO 32), I have a large supply of DTE 26 (ISO 68), may I substitute the DTE 26 or is this too heavy? TIA.
  5. drzipper

    Graziano SAG 12, new to me. Pre-start recommendations?

    Hi I will be bringing this as yet untested Graziano SAG 12 home next week. Yes I have my fingers crossed that the clutches are all sound. Would someone be so kind as to give me a pre-flight check list of things I should look at and for just prior to and just after start up? I understand the...
  6. drzipper

    2013 / 2014 Scraping Class ???? Looking for Hosts...

    Hi, We just finished a class in the Seattle Are that worked out really well. I think Forrest Don and I are working out what it takes to put on a successful class where everyone learns a lot and gets there money's worth. One of the most important elements is the venue. I am looking for people...
  7. drzipper

    Machine Tool Reconditioning and Applications of Hand Scraping

    Machine Tool Reconditioning and Applications of Hand Scraping Edward F. Connelly Hi, I have 10 brand new copies (left over from the scraping class) in the plastic wrapper, $75 including shipping. David
  8. drzipper

    Change Gears for Graziano Sag 17 Engine Lathe - $300 (Bothell)

    No association w seller: Change Gears for Graziano Sag 17 Engine Lathe ad says: Full set of change gears for Graziano Sag 17 engine lathe. Probably will work on the Sag 14 as well.
  9. drzipper

    Rivett 4NS 608 Restoration - A Little Rivett Eye Candy

    Attached are picture of a Rivett 608 restoration. This is a 1939 4NS 608 with less than .001 bed wear. Interestingly it is scraped not frosted. It will be mounted on the Original Oak Cabinet (currently out being restored. I will post more pics as I have them.
  10. drzipper

    PROPOSED Hand Scraping Class in tThis February in Seattle

    Hi, PROPOSED Hand Scraping Class in This February in Seattle It's been almost 3 years since we've had a Scrapefest. Don Roberts and Forrest would like to teach a scraping class one weekend in February 2013. Don is the Master of Metrology and Forrest is the Zen Scraper - between the two of...
  11. drzipper

    Hand Scraping Class in this February in Seattle

    Hi, Re: Hand Scraping Class in tThis February in Seattle It's been almost 3 years since we've had a Scrapefest. Don Roberts and Forrest would like to teach a scraping class one weekend in February 2013. Don is the Master of Metrology and Forrest is the Zen Scraper - between the two of them...
  12. drzipper

    SOUTHBEND HEAVY 10 METAL LATHE No Bed Wear

    Southbend Heavy 10 (10L) Metal Lathe on Factory Cabinet w Original Paint w NO BED WEAR; $2750 from Seattle This machine came out of a prototype shop and while it has been used it has not been abused or worn out. Quiet and with no discernible bed wear. If you have been looking for a metal...
  13. drzipper

    3pc Kurt Double Lock Vises

    Hi, I have the below three 6" vises I would like to sell as a lot. The first two work fine and are fully operational with no dings or hits. The last one is missing one part, the cast iron hemisphere that anchors the jaws and the center staionary jaw has taken a hit. All three $1100 pus...
  14. drzipper

    Rivett 608 Collection soon to be for sale; I have a question?

    Hi, Rivett 608 Collection soon to be for sale; I have a question? I am in the process of getting my spare Rivet 608's and accessories for sale. Included in this will be: * 1929 Change gear 608 4NS on the original oak cabinet, very little wear in amazingly good shape, most original scraping...
  15. drzipper

    Mystery Cross Slide

    Hi, I just picked up a Rivett 608 4NS and it cam with this compound. The more I look at I think it's from a Cataract. Can someone shed some light on this? David
  16. drzipper

    Rivett 6 R Collets x 32nds: 1/16" to 1-3/32

    Rivett 6 R Collets x 32nds: 1/16" to 1-3/32 & Faceplates I have a full set of set of 6-R collets 1/16" to 1-3/32 x 32nds that will fit a Rivett 1020/1030 and some 918S's. They are in good to excellent condition (varies by collet). The 5/8" is a 6 H not 6R There is also one with a Morse...
  17. drzipper

    RPC wont Start

    Hi, I have an Anderson 3hp RPC I bought new in 2006. It runs off 220V 1ph current. It just started not working, what it does is when powered up makes a motor under load sound loader than usuall and spins at low rpm, say 120rpm to give it a speed. Other info: It did not fail in use but rather...
  18. drzipper

    Southbend 10K repaint

    Southbend 10K repaint & light scraping I picked up a 10K and decided to re-paint it. First I matched the green paint, then I decided it looked more like import green, then I re-shot it Rivett grey. I looked at all the machines in the shop and had paint matched to the one I liked best. If...
  19. drzipper

    10K Underdrive S/N 9105 KKRZ Missing Motor Pulley

    10K Underdrive S/N 9105 KKRZ, Missing Motor Pulley & Tailstock Ram Lock Bolt Hi, I just acquired a 10K Underdrive S/N 9105 KKRZ. Please advise the year of manufacture as well as any other details the S/N provides. Also, the machine is missing the motor pulley, can someone provide a drawing...
  20. drzipper

    MILLER XMT 300 No voltage readout

    I just picked up a MILLER XMT 300, the issue with the machine is there is no voltage readout, The readout lights up and reports .1 volt, rotating the dial makes no difference. What should I do to diagnose the fault? Below is what I have done: I checked all the fuses and they have continuity I...

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2024 Copyright Practicalmachinist.com. All Rights reserved.

Back
Top