I'm working on a project, and would like to have some small (about 0.4 lbs) parts cast in 316 stainless steel. Initial quantity would probably be about 250. Does anyone here do small stainless castings, or have a good contact for someone who does? I can supply a 3D AutoCad file in .dwg or .dxf...
I am in need of some small 316 SS threaded fasteners like in the attached picture. As a size reference, the largest diameters are 0.300" and the threads are #8-32. The male piece is about 1" long, and the female a little less than 1/2". Probably a batch of 50 each. If interested, please send...
I am looking for someone to supply a small quantity (100) of housings like the one in the picture below. These are made from stainless steel rectangular tubing, 1" x 1/2" x 16ga. wall and 3" long. Either 304 or 316 stainless is acceptable.
There are moving components located within the...
At work, we use 17-4 dies in an extruder machine. These dies are essentially a 6" diameter disc, about 3/16" thick, with many small holes. The extruded material is abrasive, and the holes begin to wear pretty quickly. After a time, the extruded product is oversized, and the die is replaced...
I was happily going along running my Bridgeport from my 3hp RPC like I have been for 2 years now. The spindle was running, but I wasn't actually cutting, when the RPC suddenly stopped.
The breaker isn't tripped. The fuses inside my switch are good. I have 120V from black to ground, and 120V...
I have some small aluminum parts that we have been manufacturing by CNC for a few small runs while we tweaked the design a bit. Now that we feel good about it, we would like to look into having them cast. Does anyone have a contact for small aluminum castings in the 100 to 125 gram size range...
I have another goofy request. I need a thin walled Teflon(tm) cylinder, approximately 25" OD by about 25" long, and about 3/8" to 1/2" thick wall. The catch, is that this will be used as a horizontal liner in a piece of chemical process equipment at about 400°F, where the Teflon(tm) has very...
Does anyone have a source that can fabricate / grind a custom router bit for me? I'll try to post a picture, but what I need is a pear shape, about 1.160" wide across the rounded bottom, and about 1.5" tall.
The purpose here is to be able to take a piece of an existing aluminum pear-shaped...
I would like to have 16 handle frames waterjet cut from a piece of 1-1/4" thick black acetal plastic (either homopolymer or copolymer is acceptable). The drawing below shows it in a little detail, and I can forward the AutoCad drawing if you like. The plate shown is 9-1/4" by 14-1/2", but I...
I tried the search, I swear.
A friend of mine makes handle frames that he uses to build custom spearguns. I suggested to him that if he made them with a standard revolver handle profile, then it would add an additional level of customization to his spearguns because there is such an enormous...
I work in a chemical plant where we make some very aggressive acid. Lots of alloy parts here, and we are looking for a piece of 2" XXS pipe (about 7/16" wall), about 11' long. The kicker is the material needs to be Alloy-20, Hastelloy-C, or Inconel 686. We've had no luck so far locating a...
Probably a long shot, but . . .
I'm tinkering with a little project that might benefit from using a small (~ 3/8" OD) round wire stainless steel snap ring. I found lots of companies that will make them in quantity, but I would first like to try a few different sizes, wire diameters, etc. to...
I am looking for a spindle thread protector and spanner wrench to fit the 2-1/4"-8 spindle of a South Bend 10L. I know, I know, I have a lathe so what's my excuse not to just make it? I guess I've just got some other projects going that I consider a little more fun.
Anyone got an extra for a...
I was just checking out some tapered endmills for a project that's only in my head at the moment. I noticed that carbide tapered end mills are available in a straight flute, as well as the helix style. What are the relative advantages or disadvantages to the straight flute design?
Thanks,
Jeff
I am looking for black G-10 epoxy/glass material, a variation of the older Micarta. McMaster calls it "Garolite G10", but generically it seems to simply be called G10.
I found black material in sheets, but I only need a few sticks, so I would much rather start with flatbar about 1/2" x 3/4"...
A friend is looking for the apparatus that is used to crimp a small spherical ball fitting on the end of small (1/16" to 3/32") twisted wire control cables. These stainless balls are about 3/16" to 1/4" in diameter, and allow the control cable a wide range of movement in the end fixture...
I would like to heat up a little collar of 6061 aluminum to get an interference (shrink) fit on a piece of drill rod for a little temporary fixture I'm building. I will need to do some turning on the aluminum collar, and would prefer to do it after fitting to the drill rod.
I know that 6061...
This particular project is just a wooden dowel for a non-critical application. If it looks straight and round to the naked eye, it will be good enough. But I am treating it as a learning experience, and wondering how I would do this if it were a shaft or other application where accuracy...
Does anyone have a contact that I could talk to about getting a few small aluminum parts black anodized? Very small quantity though. Just 6-10 parts for this first batch, maybe more later.
They are small handle frames constructed of 3/16" thick 5052 or 5086 aluminum alloy. Here are a few...
Probably a dumb question, so apologies in advance.
HSS tapered end mills are available at reasonable prices in a much greater range of sizes and angles than router bits. Can tapered end mills with 1/4" or 1/2" shanks safely be used in a wood router? My DeWalt lists the motor 24,500 rpm...
This website or its third-party tools process personal data (e.g. browsing data or IP addresses) and use cookies or other identifiers, which are necessary for its functioning and required to achieve the purposes illustrated in the cookie policy. To learn more, please refer to the cookie policy. In case of sale of your personal information, you may opt out by sending us an email via our Contact Us page. To find out more about the categories of personal information collected and the purposes for which such information will be used, please refer to our privacy policy. You accept the use of cookies or other identifiers by closing or dismissing this notice, by scrolling this page, by clicking a link or button or by continuing to browse otherwise.