What's new
What's new

304 INVALID I, J, OR K IN G02 OR G03

Siberian64

Plastic
Joined
Jan 18, 2013
Location
Edgewood, New Mexico, USA
Did a search first and didn't find anything...
Here's a snippet of the code to cut a 2" radius, 360 deg. The start and end point is X-2 Y0 (Z is set just above the part for the test).:
(G54 is the part center X0 Y0)
T4 M06;
G90 G54 G00 X-2.5 Y-2.0;
G43 H04 Z0.25 S2000 M03;
G01 Z0.010 F25.;
G41 X-2.0 Y0.0 D04 F25.;
G02 X-2.0 Y0.0 I2.0 J0.0;
G40 X-2.5 Y2.0;
G00 Z1. M05;

Any help is appreciated...
 








 
Back
Top