I have a couple questions on the preferred wheels for the accu finish
sharpening lathe tooling and resharpening inserts for home use.
I have a 600 grit wheel on my sharpener now. I bought the Accu finish 2 used so I'm not sure how worn my wheel is . It seems to cut well and will put a mirror finish on the tool bit.
I was wondering if I should get a finer grit wheel and if I would see the difference in my final finish ?
Thanks
Hal
sharpening lathe tooling and resharpening inserts for home use.
I have a 600 grit wheel on my sharpener now. I bought the Accu finish 2 used so I'm not sure how worn my wheel is . It seems to cut well and will put a mirror finish on the tool bit.
I was wondering if I should get a finer grit wheel and if I would see the difference in my final finish ?
Thanks
Hal
Last edited: