Hello..
My company just have used Adira Press Brake PMO13530 and this machine is new for me. This machine equipped with adcontrol10, I guest this rebrand from Esa S530. I need manual book/wiring diagram to figure out below problem:
1. During origin/indexing the R axis always errors. I guest it wiring problem, but no manual it's hard works.
2. I tried disable the R axis and start the Origin. The Origin OK and we start running program but during closing ram/upper beam move very slow. I have setting axis parameter but nothing changed. I remember previusly we have same problem on Amada HFT because lose jump/bridge cable for robot option.
Anyone has the manual please PM, your help very appriciated.
Regards.
My company just have used Adira Press Brake PMO13530 and this machine is new for me. This machine equipped with adcontrol10, I guest this rebrand from Esa S530. I need manual book/wiring diagram to figure out below problem:
1. During origin/indexing the R axis always errors. I guest it wiring problem, but no manual it's hard works.
2. I tried disable the R axis and start the Origin. The Origin OK and we start running program but during closing ram/upper beam move very slow. I have setting axis parameter but nothing changed. I remember previusly we have same problem on Amada HFT because lose jump/bridge cable for robot option.
Anyone has the manual please PM, your help very appriciated.
Regards.
