alek95
Cast Iron
- Joined
- Sep 23, 2022
At the bare minimum you need:
1 vise
A couple ER collet holders
A few end mill holders
Nice to have a drill chuck or two
Collet set
Nice to have is also a face mill
You need an indicator for aligning the vise and also sometimes you need it for finding the center of a bore
1-2-3 block set is really valuable. You're gonna want that
Caliper. Can't do without that if you don't have one.
Edgefinder or two (those can break)
Rubber mallet.
Allen key set.
Deburring tools.
Lots of stuff I'm forgetting. Machinists scale, refractometer, etc.
Then just buy additional things as you need them.
1 vise
A couple ER collet holders
A few end mill holders
Nice to have a drill chuck or two
Collet set
Nice to have is also a face mill
You need an indicator for aligning the vise and also sometimes you need it for finding the center of a bore
1-2-3 block set is really valuable. You're gonna want that
Caliper. Can't do without that if you don't have one.
Edgefinder or two (those can break)
Rubber mallet.
Allen key set.
Deburring tools.
Lots of stuff I'm forgetting. Machinists scale, refractometer, etc.
Then just buy additional things as you need them.