Hi. I need a few simple low-precision gears. I intend to ask my waterjet guy to do them.
But, I don't do CAD/CAM, and he likely does not speak gear or have gear software.
Does anyone know where to find a downloadable model or file with which he can cut a 3 mm thick, 54 tooth spur gear in either Module 1.25 or 20DP with a 20 degree PA?
Or would any of you kind gearhead souls be able to provide one?
Said gear would also have a 19 mm center hole, and four equidistant 3 mm holes at a radius of 15 mm from center.
Anyone?
But, I don't do CAD/CAM, and he likely does not speak gear or have gear software.
Does anyone know where to find a downloadable model or file with which he can cut a 3 mm thick, 54 tooth spur gear in either Module 1.25 or 20DP with a 20 degree PA?
Or would any of you kind gearhead souls be able to provide one?
Said gear would also have a 19 mm center hole, and four equidistant 3 mm holes at a radius of 15 mm from center.
Anyone?