What's new
What's new

Bridgeport EZ Path II Encoder issue

BarneysSavior

Plastic
Joined
Sep 6, 2023
I have a Bridgeport EZ Path II lathe (made in 1995) that is experiencing an issue with the encoders on both the x and z axis. Neither will register movement on the screen when being moved manually or with the jog switch. If i use the 4 JOG button and move it with the arrows, it will register. Also, if I move them in any way then hit any button, it will show the change made on the screen. We went through and reloaded the program thinking it may have been an issue there, but nothing helped. Any thoughts or suggestions would be appreciated.
 








 
Back
Top