Clausing 100 Mk3 headstock gears

[ShawnC]

I just bought what I've identified to be a Clausing model 100 Mk3. I have it set up and have been able to verify overall functionality, and the only issues I've found so far are a couple of damaged headstock gears. The bull gear has several missing teeth, and the bull gear lock knob is bent. The other gear (which apparently is brass) is referred to in the Clausing operation manual as the headstock pulley gear (or cone pulley gear in another section of the manual).

There's another gear below the headstock pulley gear which appears to have a couple of teeth missing also, but I haven't gotten a good look at that one yet.

I'll of course keep an eye on eBay, but if anyone has a source for any of these, I would appreciate the info.

 

[Mike Henry]

Clausing sells parts for their older machines, but the price might more than you want to spend, assuming they have what you want. They will sometimes provide prints for parts that they no longer sell if you end up needing to make the parts you need.