What's new
What's new

Clausing Colchester lathe 13X40

JimHilliard

Plastic
Joined
Jan 4, 2009
Location
Mendon Mi.
Hello all, I am looking for a saddle gearbox (left hand) to fit a 8000 series 13X40" gap bed lathe. I bought another 13X40" lathe but it has a right hand gearbox that will not work with my "gap" bed lathe
I only need the gearbox housing but will consider a complete gearbox
Any help would be appreciated.
Also please note that I have a standard 13"X40" lathe that I will sell, trade, or part out
 
I used to recommend “ Nobilla “ in the UK for “ Colchester “ spares. They specialise in buying used “ Colchester “ lathes for re-sale or breaking up for spares. When I dealt with them years ago they were quite cheap.

Regards Tyrone.
 
Last edited:
I used to recommend “ Nobilla “ in the UK for “ Colchester “ spares. They specialise in buying used “ Colchester “ lathes for re-sale or breaking up for spares. When I dealt with them years ago they were quite cheap.

Regards Tyrone.
Good morning, thanks for the information. I emailed them with the parts that I am looking for.
 
I used to recommend “ Nobilla “ in the UK for “ Colchester “ spares. They specialise in buying used “ Colchester “ lathes for re-sale or breaking up for spares. When I dealt with them years ago they were quite cheap.

Regards Tyrone.
Good afternoon, I contacted Nobilla in the UK. I was able to acquire an "Apron Right hand" for $750. Delivered. They were very easy to work with. Simon was very helpful. My Lathe is back online.
 
Good afternoon, I contacted Nobilla in the UK. I was able to acquire an "Apron Right hand" for $750. Delivered. They were very easy to work with. Simon was very helpful. My Lathe is back online.
That’s good news. It’s a few years since I last dealt with them but they were pretty efficient regarding spare parts and quite reasonably priced at the time. I’m glad you’re back making chips.

Regards Tyrone.
 








 
Back
Top